Unconfigured Ad Widget

Collapse

Need help with subnetting....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    fd15k
    Senior Member
    • Mar 2008
    • 1049

    It's actually much simpler in general terms. All computers respect packets that are addressed to them only, that is the ones having their IP as destination (ignore routers and link level stuff for this example). A special address is reserved for the purpose of sending packets to all computers on the network at once - that is your broadcast
    Now why would you want to send data to all computers at once is a different story.

    Network address, I believe was used for a similar reason, although the behavior was different... I don't think anyone has that enabled these days. One example I remember, if you send a PING to the network address, all nodes on the network are supposed to respond...

    Originally posted by 6172crew
    Ok, since no one answered your question I will give it a shot (Im going through the CCNA course myself).

    The Broadcast is what certain protocols use to update new routes (routing tables), but not all protocols use the broadcast..read about uni-cast to find out more. Depending what equipment your talking about they use the broadcast IP to send messages to update tables. (the switch will forward the broadcast but the rtr wont.)

    The Network ID or the first IP in the network doesnt have to be the gateway, at least I havent seen it this way in the CCNA testing. The NID can be the interface of the equipment or gateway but first you must know what your running for software...RIP? Ripv2, IGRP, BGP, OSPF.


    Please let me know where Im wrong..Im still trying to wrap my head around it myself.

    Comment

    Working...
    UA-8071174-1