Unconfigured Ad Widget

**John Galt** · 10-03-2020, 9:34 AM

I found this one.

Magnetospeed glock adapter by OlivereCalderon

https://www.thingiverse.com/thing:3864003

this is a glock adapter for the magnetospeed. It's not my design, I just had the adapter separated from the rest of the STEP of the entire assembly from this file: https://grabcad.com/library/magnetospeed-rail-adapter-for-glock-1full credit goes to the original designer.To use you will need two screws and one bolt, 2 washers, 1 lock washer, and a wingnut, but i dont know the size (i just took it down to the hardware store and got what worked).

Going to try to get it printed.

**BillyMays** · 10-03-2020, 9:35 AM

Where are you located? I have a printer.

**incredablehefey** · 10-03-2020, 9:37 AM

I'm in oc and can print for you. Let me know if local.

**John Galt** · 10-03-2020, 10:10 AM

Thanks for the offer guys. I am in the SF Bay Area, east bay.

**BillyMays** · 10-03-2020, 10:40 AM

PM sent. As I mentioned, you can use an online service, but it will be much less expensive to find a friend who can print it. I recommend PETG or ABS material. Do not use PLA or any resin-based printing methods. They won't be durable enough for your application.

**John Galt** · 10-03-2020, 12:08 PM

I got it in this material. It said it was stiff and abrasion resistant.

PA12 Grey Glass Filled - Sculpteo

https://www.sculpteo.com/en/materials/sls-material/glass-filled-nylon-material/

Do you need a plastic that is very strong for your 3D printed parts? Discover PA12 Glass Filled for your additive manufacturing projects!

It was $23.

Unconfigured Ad Widget

3D print CAD model

3D print CAD model

Comment

Comment

Comment

Comment

Comment

Comment

Calguns.net Statistics

What's Going On