Unconfigured Ad Widget

Collapse

PC Repair advice, dead PS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cuda440
    CGN Contributor
    • Sep 2010
    • 3289

    PC Repair advice, dead PS

    Hey all, so about a week ago we had a short power outage, but my PC wouldn't reboot afterwards. Quick rundown of the machine-

    Started life in 2010 as a dell I580, core I5 3.2ghz, 8gb ram, nvidia gt220 gpu, samsung 1tb HDD.

    a few years later, I replaced the gt220 with a radeon 6870, replaced the factory 320w power supply with a corsair 650w, and installed a larger cpu cooler. Ran this way till last week without issues.

    I tested the power supply by removing it and jumpering the green and black wires on the 24pin connector- no power, no fan, nothing. I ordered a new corsair 650w power supply and waited.

    While the case was open, I blew out all of the dust, I reseated the CPU cooler with fresh thermal paste, threw in a new 2032 battery on the MB, and replaced the 4 2gb ram cards with 4 4gb cards. I installed the new power supply today.

    Now when I turn on the power supply, a small red led on the MB lights up. Then when I press the power button, the power button lights up and all of the cooling fans kick on, I hear the HDD spin up to speed, then all the fans slow down to idle and theres no hdmi output to the monitor, or any other activity except a lashing light on the ethernet connector. just idling fans, spinning drive and nothing else.

    Any advice on what to try next? I was really planning on cloning the HDD to a new larger SSD soon, now i'm worried that might not be possible any more.
    Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

    Thomas Jefferson
  • #2
    Skip_Dog
    Veteran Member
    • Apr 2017
    • 2656

    Put the old ram back in and turn it on...

    Comment

    • #3
      SkyHawk
      I need a LIFE!!
      • Sep 2012
      • 23530

      Do you get any keyboard lights, is the caps lock or numlock lights responsive after power on?

      Try pulling all memory modules and install one of the old ones. Make sure that one is seated well.

      You might also try installing the old video card just to see if you get any screen activity.
      Last edited by SkyHawk; 05-12-2020, 3:51 PM.
      Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

      Comment

      • #4
        baih777
        CGN/CGSSA Contributor
        CGN Contributor
        • Jul 2011
        • 5680

        Did you use Dell ram sticks.?
        Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
        I really miss the good old Pomona Gun Shows.
        I'm Back.

        Comment

        • #5
          elSquid
          In Memoriam
          • Aug 2007
          • 11844

          Originally posted by Cuda440
          Any advice on what to try next?
          Good rule of thumb...only change one thing at a time.

          What is the simplest config that should work? Start with that. Pull the video card ( use mobo video out ), put in a single stick of the old RAM, see if it POSTs.

          -- Michael

          Comment

          • #6
            Cuda440
            CGN Contributor
            • Sep 2010
            • 3289

            Originally posted by SkyHawk
            Do you get any keyboard lights, is the caps lock or numlock lights responsive after power on?

            Try pulling all memory modules and install one of the old ones. Make sure that one is seated well.

            You might also try installing the old video card just to see if you get any screen activity.
            OK the keyboard caps lock and num lock lights are responding normally and the MB makes a click when i hit any key

            I dont have the old graphics card, it was replaced in 2012

            Originally posted by Skip_Dog
            Put the old ram back in and turn it on...
            Originally posted by baih777
            Did you use Dell ram sticks.?
            I'll try throwing the old ram back in for the hell of it. I did not use dell brand ram, if there is such a thing.

            the factory ram in my pc was Elpida 2gb x 4 cards, I installed Duomeiqi 4gb cards that came from amazon with a high amount of good reviews
            Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

            Thomas Jefferson

            Comment

            • #7
              Cuda440
              CGN Contributor
              • Sep 2010
              • 3289

              Originally posted by elSquid
              Good rule of thumb...only change one thing at a time.

              What is the simplest config that should work? Start with that. Pull the video card ( use mobo video out ), put in a single stick of the old RAM, see if it POSTs.

              -- Michael
              well crap, I just went to unplug everything to swap the RAM, and I realized that I had accidentally plugged my hdmi cord into the mobo instead of the graphics card.

              Hooked the power and hdmi back to the correct ports, and she came back to life!

              Thanks a ton! and a big Thanks to everyone who helped. I'll be cloning my HD soon, once the data is safe I'll see what kind of life remains in the mobo and processor
              Last edited by Cuda440; 05-12-2020, 5:38 PM.
              Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

              Thomas Jefferson

              Comment

              • #8
                SkyHawk
                I need a LIFE!!
                • Sep 2012
                • 23530

                Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

                Comment

                • #9
                  elSquid
                  In Memoriam
                  • Aug 2007
                  • 11844

                  Originally posted by Cuda440
                  well crap, I just went to unplug everything to swap the RAM, and I realized that I had accidentally plugged my hdmi cord into the mobo instead of the graphics card.


                  Been there, done similar!

                  -- Michael

                  Comment

                  • #10
                    baih777
                    CGN/CGSSA Contributor
                    CGN Contributor
                    • Jul 2011
                    • 5680

                    Dell uses proprietary ram sticks.
                    Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
                    I really miss the good old Pomona Gun Shows.
                    I'm Back.

                    Comment

                    • #11
                      Cuda440
                      CGN Contributor
                      • Sep 2010
                      • 3289

                      Originally posted by baih777
                      Dell uses proprietary ram sticks.
                      Never heard of that, mine seems to have regular old chinesium pc3 sticks.

                      Old ram, factory installed


                      new ram
                      https://www.amazon.com/gp/product/B07B9VVBHF/ x2

                      New ram seems to be registering the full 16gb and working perfectly
                      Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

                      Thomas Jefferson

                      Comment

                      Working...
                      UA-8071174-1