LiPo pouch replacement on small devices, source?

[the86d]

A few devices I have (and some in the mail such as generic Bluetooth gamepads and keyboards) have LiPo pouches installed inside them. I know they are going to die, but does anyone have a source for them?

I have a MPC Bluetooth keyboard I would like to upgrade the battery on with a larger one if available.

Cell batteries w/PCB, and solder the tabs and solder-tac wires?

Does anyone replace them?

Bad source, good source?

[NukleusX]

Perhaps check with a shop that does cell phone repair, they may have an idea?

[the86d]

Anyone use these?

http://www.ebay.com/sch/Unbranded-Generic-LiPo-Rechargeable-Batteries/48619/bn_2826167/i.html

(I am aware of compatibility issues, and the issues involved with LiPo and Lithium Ion.)

[packnrat]

go to a rc toy house. and buy a bunch of the sub "C" batteries and wire them up.
good to go.



.

[the86d]

go to a rc toy house. and buy a bunch of the sub "C" batteries and wire them up.
good to go.
.

I'd have to hot glue them to the back of the device, or stir-weld/hot-melt a battery holder to the back of this keyboard:


Butt you've got to do what you've got to do...
Then again there is no protection on sub "c" tabbed batts I just looked up...

[gorn5150]

I buy them on Amazon. If you search r/c helicopter batteries you get all the different capacities. I've not had a problem with any that i have bought and installed.

[AgentAK]

Try http://hobbyking.com