FiOS ac router w/ nvidia shield

[stevemc1979]

I have the FiOS g1100 router. It is .11ac. My phone connects to the router on ac. I have other devices that connect on ac. The shield console only connects on .11n.
The router is ac1750 class. The shield is 2x2 mimo if that makes a difference.

The n connects at 150mbps which is more than my internet connection. But, i would like to connect at ac speeds just because.

Any ideas?

[yellowsulphur]

I looked it up and 802.11n (2x2) with a 20MHz channel width has a max rate of 130-144 Mbps while a 40MHz channel width has a max rate of 300 Mbps. 802.11ac (2x2) has a max rate of 867 Mbps.

[stevemc1979]

The connection from my phone to router via ac is 433mbps. Im guessing my phone is 1x1

[yellowsulphur]

The connection from my phone to router via ac is 433mbps. Im guessing my phone is 1x1

That is the max rate for 802.11ac (1x1), but a realistic rate would probably be around 300 Mbps or so. A realistic rate for (2x2) is around 550 Mbps or so.

[stevemc1979]

I understand that. Im curious to know why my 2x2 shield wont connect to the router

[yellowsulphur]

My mistake. I thought the shield was an n class 2x2.

[nshilofwp]

The connection from my phone to router via ac is 433mbps. Im guessing my phone is 1x1