Unconfigured Ad Widget

Collapse

Broken Armory 80% question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • desrt2
    Member
    • Feb 2012
    • 319

    Broken Armory 80% question

    I'm currently working on a Broken Armory 80%.
    They are currently out of lowers.
    Does anyone know if other lowers, MILSPEC or others, will work in the Broken Arms jig?
    BTW, the jig is incredible and their 80% lowers are very nice.
    sigpic

    "Let them hate so long as they fear."
  • #2
    Broken Arms
    Junior Member
    • Jul 2013
    • 91

    Originally, no. But we have modified the jig, so now it will work with a standard mil-spec forged 80% lower.

    Currently out of stock until July 30th
    But lowers are back in stock
    HIGH QUALITY CNC MACHINED 80% LOWERS
    WWW.BROKENARMORY.COM

    Comment

    • #3
      sigstroker
      I need a LIFE!!
      • Jan 2009
      • 19993

      Any reccos for a cheap drill press? Is 570 rpm too fast?

      Comment

      • #4
        toddh
        Banned
        • Dec 2010
        • 1914

        Originally posted by sigstroker
        Any reccos for a cheap drill press? Is 570 rpm too fast?
        Maybe use the search button instead of hijacking op's thread.

        Comment

        • #5
          desrt2
          Member
          • Feb 2012
          • 319

          After much research I purchased the WEN 4214 12-Inch Variable Speed Drill Press from Amazon for $269.
          The speeds range from 530 - 3100 infinitely adjustable. No need to manually work with pulleys.
          Has depth stop and quill lock. Overhead light and cross hair laser.
          The table is a bit small but you could always buy an aftermarket table from a place like Woodcraft.
          I've been following their video 100% and it's turning out just like they show.
          The video tells you what speeds to use in each phase, why and what other speeds are acceptable.
          Since I haven't finished the lower yet, I can't verify the Wen but it has a lot of features that most do not in the sub $1000 price range.
          It's probably the best option without purchasing a mill that's $1500+.
          sigpic

          "Let them hate so long as they fear."

          Comment

          • #6
            LCU1670
            Veteran Member
            • Mar 2010
            • 2865

            Awhile back I saw an ad for a jig you use with a router, has anyone tried it?
            sigpic Waterborne!

            Former: Knight of Front Sight &
            Gold Star Member

            Comment

            • #7
              desrt2
              Member
              • Feb 2012
              • 319

              It looks like the next best solution to the full, multi-plate/step jigs.
              They are closer to being a mill rather than a press and can take the horizontal pressure on the bearings.
              IIRC they even rent out the routers.
              sigpic

              "Let them hate so long as they fear."

              Comment

              • #8
                sigstroker
                I need a LIFE!!
                • Jan 2009
                • 19993

                Originally posted by toddh
                Maybe use the search button instead of hijacking op's thread.
                Listen, schmuck. OP's question was answered. Nobody is highjacking anything. I'm asking the Broken Armory guy about what works with HIS tooling and HIS jig.

                Comment

                • #9
                  SonofWWIIDI
                  I need a LIFE!!
                  • Nov 2011
                  • 21583

                  Originally posted by sigstroker
                  Listen, schmuck. OP's question was answered. Nobody is highjacking anything. I'm asking the Broken Armory guy about what works with HIS tooling and HIS jig.
                  No name calling please.
                  Sorry, not sorry.
                  🎺

                  Dear autocorrect, I'm really getting tired of your shirt!

                  Comment

                  • #10
                    desrt2
                    Member
                    • Feb 2012
                    • 319

                    Update on the Broken Armory 80 % build.

                    Finished milling the FCP last night and assembled the lower. Next phase is checking out the upper fit and get it out to the range.

                    The Broken Armory instructional video is top notch / professional and guides you all the way thru. Follow it to the letter and I can't see anyone have any issues. I would also say don't second guess them. I saw a few areas where I could have made a paper weight.

                    Clamp your work down. It's tedious to reseat the clamps each hole and each pass but it's a must. I just did one plate per day and took my time.

                    Also, because I don't have a serious professional press, I checked the depth and stop constantly. It's always better to remove to little than too much. You can make adjustments later. Brilliant to incorporate the depth guide into the vertical plates.

                    Take your time.

                    Drill and mill in small depths, giving the metal and bit time to cool and keep the receiver and bit lubricated. Remove shavings as you go and wipe them off of the bits.

                    Great idea using the set screw in the magazine latch instead of roll pin and hole. I have a special roll pin guide and punch just for that on mil-spec receivers but it's a PITA.


                    These pictures don't give the lower justice.







                    Thanks for reading this if you've made it this far.
                    Last edited by desrt2; 07-21-2014, 1:01 AM.
                    sigpic

                    "Let them hate so long as they fear."

                    Comment

                    • #11
                      desrt2
                      Member
                      • Feb 2012
                      • 319

                      Assembled receiver pics.
                      The fit is better than some of the registered commercial lowers I have. Zero slop between the upper and lower.
                      I did not have to go back and make any milling adjustments or filing. That's not a result of my crazy awe-inspiring skills but the jig and following directions.
                      Awesome using a set screw for the magazine release instead of a roll pin. The screw is hew drive and the threads are at the top of the shank.





                      Sorry for the blurry pics. You can see machine marks but they do not look as pronounced as this picture and any refining would be cosmetic only.

                      Last edited by desrt2; 07-23-2014, 1:24 PM.
                      sigpic

                      "Let them hate so long as they fear."

                      Comment

                      • #12
                        NorCalAthlete
                        Senior Member
                        • Jul 2010
                        • 1799

                        Looks very nicely and cleanly done!
                        Your views on any given subject are the sum of the media that you take in, scaled to the weight of the credibility of the source that provides it, seen through a lens of your own values, goals, and achievements.

                        You Are All Ambassadors, Whether You Like It Or Not

                        Pain is the hardest lesson to forget; Ego is the anesthesia that deadens the pain of stupidity.

                        Bureaucracy is the epoxy that lubricates the gears of progress.

                        Comment

                        • #13
                          Broken Arms
                          Junior Member
                          • Jul 2013
                          • 91

                          Originally posted by desrt2
                          Update on the Broken Armory 80 % build.

                          Finished milling the FCP last night and assembled the lower. Next phase is checking out the upper fit and get it out to the range.

                          The Broken Armory instructional video is top notch / professional and guides you all the way thru. Follow it to the letter and I can't see anyone have any issues. I would also say don't second guess them. I saw a few areas where I could have made a paper weight.

                          Clamp your work down. It's tedious to reseat the clamps each hole and each pass but it's a must. I just did one plate per day and took my time.

                          Also, because I don't have a serious professional press, I checked the depth and stop constantly. It's always better to remove to little than too much. You can make adjustments later. Brilliant to incorporate the depth guide into the vertical plates.

                          Take your time.

                          Drill and mill in small depths, giving the metal and bit time to cool and keep the receiver and bit lubricated. Remove shavings as you go and wipe them off of the bits.

                          Great idea using the set screw in the magazine latch instead of roll pin and hole. I have a special roll pin guide and punch just for that on mil-spec receivers but it's a PITA.


                          These pictures don't give the lower justice.







                          Thanks for reading this if you've made it this far.

                          Nice work! And thank you for the kind words
                          HIGH QUALITY CNC MACHINED 80% LOWERS
                          WWW.BROKENARMORY.COM

                          Comment

                          Working...
                          UA-8071174-1