Unconfigured Ad Widget

Collapse

Trying Froglube for the first time

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jasonaspears
    Senior Member
    • Feb 2011
    • 1200

    Trying Froglube for the first time

    Fingers crossed but so far I'm loving the clean smell and from what I can tell, the guns feel smoother. Now to get to the range. I really can't see how this product when applied correctly could cause the ftf issues I've heard about. I'm looking forward to having first hand knowledge now. Wish me luck
  • #2
    Mr. Gillious
    Banned
    • Nov 2011
    • 1549

    Which guns did you use it on?

    I recently bought a used Glock 21 and when I took it apart and inspected it I had this "WTF?" look on my face because I seen this soapy type of residue on the frame rails and the seller said,"I use froglube on my guns".

    I usually use ballistol.

    good luck tho!

    Comment

    • #3
      Jasonaspears
      Senior Member
      • Feb 2011
      • 1200

      Originally posted by Mr. Gillious
      Which guns did you use it on?

      I recently bought a used Glock 21 and when I took it apart and inspected it I had this "WTF?" look on my face because I seen this soapy type of residue on the frame rails and the seller said,"I use froglube on my guns".

      I usually use ballistol.

      good luck tho!
      Kimber 1911, XD40, and Sig P226 MK25.

      Comment

      • #4
        Jasonaspears
        Senior Member
        • Feb 2011
        • 1200

        First test was to put the gun in the freezer. Got it down to 15 degrees and the slide was very sluggish. Would close when the slide was released but was very slow. Back up around 45 degrees it started functioning like normal. Not sure if other folks have had similar results.

        Comment

        • #5
          -hanko
          CGN/CGSSA Contributor
          CGN Contributor
          • Jul 2002
          • 14174

          Originally posted by Jasonaspears
          Fingers crossed but so far I'm loving the clean smell and from what I can tell, the guns feel smoother. Now to get to the range. I really can't see how this product when applied correctly could cause the ftf issues I've heard about.
          You've not hunted in very cold weather. The crap locked-up a Browning bolt gun and did a nice job at it.

          I should have known better, as FL is a product originally developed for lubricating amusement park rides...they're obviously not open in winter.

          The "clean smell" is at the end of the list in my selection criteria for stuff to lube my weapons.
          True wealth is time. Time to enjoy life.

          Life's journey is not to arrive safely in a well preserved body, but rather to slide in sideways, totally worn out, shouting "holy schit...what a ride"!!

          Heaven goes by favor. If it went by merit, you would stay out and your dog would go in. Mark Twain

          A man's soul can be judged by the way he treats his dog. Charles Doran

          Comment

          • #6
            sd_shooter
            I need a LIFE!!
            • Dec 2008
            • 14340

            It's a good thing you sniffed it, that's probably the number one reason people use it. The other is that it's edible. Yes! Go on, taste it!

            Comment

            • #7
              cdtx2001
              CGN Contributor
              • Apr 2009
              • 6630

              My friend uses it for the outside of his carry weapon. Inside still gets regular gun oil.
              Custom made Tail Gunner Trailer Hitch for sale.
              http://www.calguns.net/calgunforum/s...php?p=17820185

              "Hokey religions and ancient weapons are no match for a good blaster at your side kid" -Han Solo

              "A dull knife is as useless as the man who would dare carry it"

              Comment

              • #8
                1911R SSS
                Senior Member
                • Jul 2013
                • 862

                I use it, never an issue maybe it's the firearms I use it on.

                Comment

                • #9
                  Jasonaspears
                  Senior Member
                  • Feb 2011
                  • 1200

                  Originally posted by -hanko
                  You've not hunted in very cold weather. The crap locked-up a Browning bolt gun and did a nice job at it.

                  I should have known better, as FL is a product originally developed for lubricating amusement park rides...they're obviously not open in winter.

                  The "clean smell" is at the end of the list in my selection criteria for stuff to lube my weapons.
                  It must have been quite cold in order to do that. I froze my 1911 and everything still worked properly albeit slowly at first. The slide was slow to work initially is what I found but it did work and slid home into battery without issue. Maybe too much material was left on in your case??

                  I'm still saving my final judgement until more tests are done and won't be changing the cleaning products any of my other guns in the meantime.

                  By the way, the clean smell wasn't even on my list of important items but I have to admit, I sure like being able to smell that over the strong fumes.

                  Comment

                  • #10
                    mabilis_matulis
                    Calguns Addict
                    • Oct 2012
                    • 5121

                    I use it on my glock 34 and 21.. No issues yet.. Good luck!
                    sigpic
                    "its hard to face the problem if the problem is your face"

                    Comment

                    • #11
                      Ladyrr
                      Senior Member
                      • Jun 2013
                      • 825

                      Use it on rifle, shotgun and g34 no issues. Cold wet dry hot all conditions no issues

                      Comment

                      • #12
                        Dannicus
                        Veteran Member
                        • Jan 2011
                        • 2577

                        I stopped using froglube as a lubricant because it's not really that great of a lube. I like it for external protection on my blued guns, tho. Except for my stainless stuff; those get carnuba'd.

                        Comment

                        • #13
                          golfish
                          I need a LIFE!!
                          • Mar 2013
                          • 10129

                          I use FL on my AR's, seems to work just fine on them.

                          I've used Hoppe's on all my other guns since the 60's. I bought a can of Break Free CLP a few months ago. That seems to work pretty good too...

                          I'm trying to get away from using the Hoppe's #9 solvent.
                          It takes a lot of balls to play golf the way I do.
                          Happiness is a warm gun.

                          MLC, First 3

                          Comment

                          • #14
                            Citadelgrad87
                            I need a LIFE!!
                            • Mar 2007
                            • 17001

                            Never bought into the hype. If been shooting 40 years, give or take. I've learned police and military maintenance and cleaning.

                            In that time, I've used Hoppes #9 and gun oil or light machine oil, then, as it came online, clp, for everything. When I got a Garand and m1a, I added lithium gun grease.

                            None of it has ever gummed up, failed to perform as a lubricant and protectant, or failed to clean in any environment from humid and hot South Carolina to freezing temps to the dry dusty Arizona area.

                            I'm not looking for a miracle lubricant. What I use works fine.

                            Anyone ever read a "clp horror story" thread?
                            Originally posted by tony270
                            It's easy to be a keyboard warrior, you would melt like wax in front of me, you wouldn't be able to move your lips.
                            Originally posted by repubconserv
                            Print it out and frame it for all I care
                            Originally posted by el chivo
                            I don't need to think at all..
                            Originally posted by pjsig
                            You are talking to someone who already won this lame conversation, not a brick a wall. Too bad you don't realize it.
                            XXXXXXXXXXXXXXXXXXXXXXX
                            sigpic

                            Comment

                            • #15
                              toby
                              Banned
                              • Jan 2010
                              • 10576

                              Frog Hype would be a more suiting name for it.

                              Comment

                              Working...
                              UA-8071174-1