Unconfigured Ad Widget

Collapse

Another 9mm ar question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ibgreezy
    Senior Member
    • Jun 2010
    • 509

    Another 9mm ar question

    Does any body know if a bushmaster 9mm bcg is ramped? I purchased one use and the seller said I needed a 9mm hammer. With the 9mm hammer I can't even charge the upper, works fine with a standard hammer.



    Here is a pic of a cmmg ramped 9mm bcg on the right and the bushmaster one on the left.

    Is the finish on the bushmaster normally really rough? Also with a snap cap the extractor doesn't hold a round to tight, seems ok with a live round, is this normal? Anything I should check before I fire it?

    And another also, if the bolt doesn't go all the way home and I pull the trigger will I have an out of battery discharge? With a snap cap the bolt didn't go all the way home and when I pulled the trigger the hammer dropped and the bolt came home.

    Thanks you guys so much because I would have nobody else to ask, I've tried google and never found any definite answers.
  • #2
    redcliff
    Calguns Addict
    • Feb 2008
    • 5676

    Bushmaster 9mm bolts are factory "ramped" . Use your standard hammer without ledge (DPMS) type.

    If your bolt doesn't go all the way home prior to hammer release yes you can have an out of battery discharge. Be sure to check to ensure its closing properly with live ammunition before firing at the range. Snap caps don't always operate/load properly, they're designed for dry-firing not function checking. A dummy round with no primer/powder would let you trouble-shoot safely.
    "You keep using that word. I do not think it means what you think it means."
    "What we get away with isn't usually the same as what's good for us"
    "An extended slide stop is the second most useless part you can put on a 1911"

    "While Ruger DA revolvers may be built like a tank, they have the aesthetics of one also,
    although I suppose there are a few tanks which I owe an apology to for that remark"

    Comment

    Working...
    UA-8071174-1