Unconfigured Ad Widget

Collapse

Removed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    CrippledPidgeon
    Senior Member
    • Sep 2007
    • 1765

    Originally posted by dreyna14
    Exactly. That's why it's called stainLESS. It just won't rust as much.
    err... The "less" in stainless doesn't literally mean that it stains less. As a suffix (something you attach to the end of a word), it means "without." So priceless means "without price," rather than "it doesn't cost as much." As I was reminded a while back, "stainless" steel should really be labeled "corrosion resistant."

    But yea, to highintel, you need to be more careful about corrosion because you live near saltwater. Make sure you keep desiccant or some other device that reduces humidity in your safe, and make sure you oil everything before storage. At least you were able to exchange the barrel. It was a relatively inexpensive lesson compared to having to fix an entire gun...

    Comment

    • #17
      Fjold
      I need a LIFE!!
      • Oct 2005
      • 23094

      I have 416 SS barrel blanks that have been sitting in my gunroom for years. There are no rust spots or signs of any corrosion on them. I have stainless guns that I have been shooting for 20+ years and none of them have any signs of corrosion on them.

      I don't wipe them down with an oily rag or otherwise preserve them except that they sit in silicon treated socks in the safe. The only oil that goes on them is in the trigger group where some of the parts aren't stainless.
      Frank

      One rifle, one planet, Holland's 375




      Life Member NRA, CRPA and SAF

      Comment

      • #18
        asheron2
        Senior Member
        • Dec 2007
        • 726

        400 series SS will corrode because of the higher carbon content. This higher carbon content also makes the barrel drastically stronger.

        For truly rust proof it will probably need to be 300 series like 316(implant grade).

        Refer to the "Machinery Handbook" for a good rundown on material properties that are useful in layman terms

        Comment

        • #19
          Reelemup
          Senior Member
          • Feb 2013
          • 1392

          416 sst has iron in it...so send it to a local plating shop to passivate it. I guess the mfger did not do it to save money. Perhaps you have the rusting finger syndrome ...you know when some one touches a piece of steel and finger prints show in thirty seconds. I never had any of my guns showing rust and some has not been properly cleaned weeks after shooting them. Some 22 LR s maybe years ...
          Last edited by Reelemup; 10-28-2013, 10:26 PM.
          Fish molester also pick shrooms

          Comment

          • #20
            Reelemup
            Senior Member
            • Feb 2013
            • 1392

            Originally posted by asheron2
            400 series SS will corrode because of the higher carbon content. This higher carbon content also makes the barrel drastically stronger.

            For truly rust proof it will probably need to be 300 series like 316(implant grade).

            Refer to the "Machinery Handbook" for a good rundown on material properties that are useful in layman terms
            Carbon does not rust. Iron does. 300 series stainless is useless in barrel making
            Fish molester also pick shrooms

            Comment

            • #21
              blazeaglory
              Calguns Addict
              • May 2011
              • 6370

              LUBE IT UP!!
              A note to the NSA or anyone gathering information on me, this disclaimer is for you..."Everything I type on this website Is purely fictional and for entertainment purposes only. None of it is true."

              Also, sometimes I type in CAPS to emphasize a POINT. Please dont interpret that as YELLING. Sorry if I HURT any fuzzy little bunny's FEELINGS out there.

              Comment

              • #22
                asheron2
                Senior Member
                • Dec 2007
                • 726

                1 week old 416R SS barrel starting to corrode?

                Originally posted by Reelemup
                Carbon does not rust. Iron does. 300 series stainless is useless in barrel making
                Crud, your right!! It's the decreased chromium content. Also 300 series would probably be for small small arms like 22 but have no longevity.


                Sent from my iPod touch using Tapatalk

                Comment

                • #23
                  opie4386
                  Senior Member
                  • Apr 2012
                  • 1336

                  My stainless springfield 1911 started corroding just like what you see on the barrel. That was on the 3rd day of owning it.

                  I knew it was my fault because i did exactly what you did. I cleaned it, DID NOT oil and stored it in its original container.

                  My fingerprint started rusting on the slide.

                  Now i wont give you a hard time because you are learning. But one thing i would not have done was to get it exchanged.

                  Comment

                  • #24
                    kurac
                    Veteran Member
                    • Dec 2005
                    • 2917

                    if you give stainless a high polish it will resist corrosion better. Also, don't use steel wool to clean it, the steel will leave residue on the stainless which will then rust first. On stainless, you want to use a stainless brush or better yet, one of those Scotch Brite pads.
                    www.culinagrips.com
                    "custom grips for shooters by shooters"

                    Comment

                    Working...
                    UA-8071174-1