Tweet
Here is the link: http://www.eabco.com/brockmanbrake.html
I would like to get your opinion on this muzzle brake and the company. i will be putting this on my Browning X-Bolt 300 WSM. It looks like too "turn off" the brake, you twist the outside part of the brake to close the ports. i like the fact that you can turn it "on and off" without taking the actual brake off and without affecting anything other then your hearing. i will be both bench shooting "brake on" 80% to "brake off" 20% and hunting "brake off" 100%. it also seems like there gunsmithing method seems to make sense and quality seems to be there:
Our Precision Installation Process
Our selection of muzzle brakes represents the the traditional as well as the exotic but always with the emphasis on accuracy, functionality, and value. When accuracy is a priority, installation requires proper centering and alignment. And, even though the crown of the barrel is out of sight at the rear of the brake, it is extremely critical to the accuracy of the firearm after the installation. Note: This is a custom machining and Gunsmithing service that we do in batches to keep the cost down... delivery is approximately 4-6 weeks.
On-Center Threaded Brakes - Our muzzle brakes are all threaded on-center with the bore. This assures that the exit hole is aligned with the bullet path and that ignition gases affect the bullet equally on all sides... which is the best condition for accuracy. There is no slop in our threads... this is a thread-to-fit process for best alignment.
After the muzzle is threaded and before the brake is installed, we cut the crown. Our crowning system aligns the muzzle and the chamber between centers (C-T-C) to assure that a perfect crown is cut. This crown is inspected with a loupe to be sure it is perfect before the muzzle brake is installed.
No-Stress Mounting - Our muzzle brake threads are snug with no wobble... again to assure alignment and accuracy. Beyond this, we install them with a zero-torque method to be sure no stress is introduced into the barrel.
Ordering Custom Shop Work On-Line - Our shopping cart system allows you to completely enter an order, get the total price calculated, and submit it to us prior to sending in your gun for the work to be done. In the payment section of entering the order, you can confirm that you'll be sending the payment (with your gun) separately. We'll hold the complete order with all of the details exactly as you entered them... ready for when your gun arrives for the work!
I would like to get your opinion on this muzzle brake and the company. i will be putting this on my Browning X-Bolt 300 WSM. It looks like too "turn off" the brake, you twist the outside part of the brake to close the ports. i like the fact that you can turn it "on and off" without taking the actual brake off and without affecting anything other then your hearing. i will be both bench shooting "brake on" 80% to "brake off" 20% and hunting "brake off" 100%. it also seems like there gunsmithing method seems to make sense and quality seems to be there:
Our Precision Installation Process
Our selection of muzzle brakes represents the the traditional as well as the exotic but always with the emphasis on accuracy, functionality, and value. When accuracy is a priority, installation requires proper centering and alignment. And, even though the crown of the barrel is out of sight at the rear of the brake, it is extremely critical to the accuracy of the firearm after the installation. Note: This is a custom machining and Gunsmithing service that we do in batches to keep the cost down... delivery is approximately 4-6 weeks.
On-Center Threaded Brakes - Our muzzle brakes are all threaded on-center with the bore. This assures that the exit hole is aligned with the bullet path and that ignition gases affect the bullet equally on all sides... which is the best condition for accuracy. There is no slop in our threads... this is a thread-to-fit process for best alignment.
After the muzzle is threaded and before the brake is installed, we cut the crown. Our crowning system aligns the muzzle and the chamber between centers (C-T-C) to assure that a perfect crown is cut. This crown is inspected with a loupe to be sure it is perfect before the muzzle brake is installed.
No-Stress Mounting - Our muzzle brake threads are snug with no wobble... again to assure alignment and accuracy. Beyond this, we install them with a zero-torque method to be sure no stress is introduced into the barrel.
Ordering Custom Shop Work On-Line - Our shopping cart system allows you to completely enter an order, get the total price calculated, and submit it to us prior to sending in your gun for the work to be done. In the payment section of entering the order, you can confirm that you'll be sending the payment (with your gun) separately. We'll hold the complete order with all of the details exactly as you entered them... ready for when your gun arrives for the work!
Comment