How do I remove paint from my stock?

[wilit]

My buddy gave me an adjustable stock that he didn't want anymore. The only thing wrong with it is, it's painted desert cammo. I was really planning on having an all black (you know evil) rifle. Anyone know how to take the paint off without melting the ABS plastic? Or should I just sell it and buy a new one?

[220RR]

paint it over again

[LOW2000]

Paint thinner/acetone?

[m1371]

Paint thinner/acetone?

Don't go that route. It could screw with the plastic.

I'd figure out exactly how much paint build-up it has on it first. If the person who painted it was heavy-handed with the krylon or it's been painted several times (ie- thick coats) I'd consider trying to get some of the paint off.

Might look at really fine sand paper and hitting it lightly. Be careful not to start getting into the plastic.

If it's only a single coat, just paint over it. Clean it off really good and scuff it up a wee bit with fine sandpaper or fine steelwool to get good adhesion with the new coat.

Something like the Krylon stuff that is made specific for plastic would be my choice.

That's the cheap route. The easy route would be to sell it and buy one you like/want.

[Josh]

home depot has a paint remover called orange something, cant remember the exact name.

Its an orange goo that dosent mess with most plastics.

[wilit]

What kind of paint did he use? Some acrylics are removable with rubbing alcohol.

I know for sure it's enamel. I'm fairly certain he used a Krylon rattle can.

[theoutdoorkid]

I would use nail polish remover (basically watered down acetone) and a fine grit steel wool. It shouldn't hurt the stock at all and when it is done it will look a lot sharper then if you just paint over it.

[m1371]

I know for sure it's enamel. I'm fairly certain he used a Krylon rattle can.

You should have an easy time of it.

If it turned out to be the Krylon "Fusion" stuff that's meant specific for plastics, it would likely be a bit harder to remove. That's stuff bonds pretty damn permanent if applied correctly.