Easy route to PDW

[sigstroker]

Obviously can only be owned in an American state.

430108816_1w.jpg

It's by Strike Industries for SIG P320 fire control module and slide.

[Big Chudungus]

interesting says its "not a gun" but ain't The Frame also "The Gun" or does Sig got serial numbers on other parts??? Some reason why this is for Sigs but not Glocks? Don't show WTF is supposed to mount on the butt Weavers, but maybe that is for legal reasons and you are supposed to DIY a stock butt?

https://www.thefirearmblog.com/blog/2023/03/14/tfb-review-p320-strike-modular-chassis-smc/

Why not add mag holders in the "L" of the stock? Would a horizontal mag holder in front of the trigger guard be a still legal CA pistol? It would be more or less same shape/size and grip as a big flashlight.

[sigstroker]

Glocks aren't modular, the P320 is. The serial number is on the fire control unit.

There are plenty of stocks and braces that attach to a Pic rail.

[k1dude]

Looks like you have to add all sorts of other expensive parts to get it configured in working order.

SMC-Bravo-2.jpg

[Batman]

Aside from being uglier, what's the difference between something like this and a CAA conversion kit?

[sigstroker]

Looks like you have to add all sorts of other expensive parts to get it configured in working order.

SMC-Bravo-2.jpg

You don't have to add any of the crap on the front. You can put a light directly on the dust cover.

[sigstroker]

Aside from being uglier, what's the difference between something like this and a CAA conversion kit?

This one is a lot simpler and compact. You might be able to put it in a normal 320 holster,

[igs]

PDW by definition is:

1. Armor penetrating
2. Fully automatic

That is neither.

[naz]

by Strike Industries for SIG P320 fire control module and slide.

[ar15barrels]

You probably need to trim a little more of the plastic out of the front of the trigger window.
i recently worked on a 10-22 that was in a bullpup chassis and the trigger would not reset.
making a little more room in the trigger window gave the trigger the room necessary to reset.

[k1dude]

I have a Strike Industries P365 (X Macro) grip module and the trigger resets fine. I was impressed by the quality of their grip module. I think you may have just been unlucky. Maybe check for flash. Or as ar15barrels said, enlarge the trigger window a tiny bit. Make sure the FCU is seated properly of course.

[Quiet]

Aside from being uglier, what's the difference between something like this and a CAA conversion kit?

The Strike Industries frame by itself (unattached) is CA legal.

The Strike Industries frame with a SIG FCU and a non-threaded barrel/slide assembly would be a CA legal semi-auto pistol.

The Strike Industries frame with a SIG FCU and a threaded barrel/slide assembly would be an illegal assault weapon.
The Strike Industries frame with a SIG FCU and non-threaded barrel/slide assembly with a fixed 10 round magazine in the pistol's grip would be a CA legal semi-auto pistol with a fixed magazine.

The Strike Industries frame with a SIG FCU and non-threaded barrel/slide assembly with the front magazine holder would be an illegal assault weapon.
The Strike Industries frame with a SIG FCU and non-threaded barrel/slide assembly with the front magazine holder and a fixed 10 round magazine in the pistol's grip would be a CA legal semi-auto pistol with a fixed magazine.

The Strike Industries frame with a SIG FCU and non-threaded barrel/slide assembly with the shroud attached would be an illegal assault weapon.
The Strike Industries frame with a SIG FCU and non-threaded barrel/slide assembly with the shroud attached and a fixed 10 round magazine in the pistol's grip would be a CA legal semi-auto pistol with a fixed magazine.

The Strike Industries frame with a SIG FCU and barrel/slide assembly with a (attached or unattached) brace or stock would be an illegal SBR.

*Fixed magazine for a SIG P320/P365 means the magazine is affixed in the pistol's grip in such a manner that it cannot be removed until after the slide is removed from the frame or it is permanently attached in the grip.

[naz]

You probably need to trim a little more of the plastic out of the front of the trigger window.
i recently worked on a 10-22 that was in a bullpup chassis and the trigger would not reset.
making a little more room in the trigger window gave the trigger the room necessary to reset.

[Quiet]

The stay only affected the proposed ATF rule change and did not have any effect on State laws on the issue.

CA SBR/SBS laws are stricter than the Federal NFA laws and, for CA, the attachment of an arm stabilizing brace on a handgun can still run afoul CA SBR/SBS laws.
^No Federal felony over a brace, but CA felony over a brace is still a thing that can happen.

[sigstroker]

The stay only affected the proposed ATF rule change and did not have any effect on State laws on the issue.

CA SBR/SBS laws are stricter than the Federal NFA laws and, for CA, the attachment of an arm stabilizing brace on a handgun can still run afoul CA SBR/SBS laws.
^No Federal felony over a brace, but CA felony over a brace is still a thing that can happen.

From the OP:

Obviously can only be owned in an American state.