Unconfigured Ad Widget

Collapse

Changing fixed front sight on AR

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jujubeez
    Senior Member
    • Apr 2012
    • 1065

    Changing fixed front sight on AR

    Hello Calguns people!

    I'm new to the rifle world and just got my first AR. I bought a mid-length rifle with fixed front sights. I read that you can change the fixed front sights for a flip one. Can anyone recommend something something not overly expensive, possibly under $85?

    Thanks

    -JJ
  • #2
    joelogic
    Calguns Addict
    • May 2008
    • 6597

    Why replace it? What do you have now? A2 gas block?
    Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

    Comment

    • #3
      jujubeez
      Senior Member
      • Apr 2012
      • 1065

      Yes, I have an A2 gas block I believe. I jsut learned Yankee Hill makes them bu they are way to expensive, around 200. Trying to keep it under 100 if possible.

      I bought an eo tech holo sight and i noticed the front sight kinda gets in the way for me sometimes.

      Comment

      • #4
        jujubeez
        Senior Member
        • Apr 2012
        • 1065

        Actually, I don't know what I have to be honest. I just know that the sight is fixed, and the sight looks like it holds the gas rod.

        Comment

        • #5
          CHS
          Moderator Emeritus
          CGN Contributor - Lifetime
          • Jan 2008
          • 11338

          Originally posted by jujubeez
          Yes, I have an A2 gas block I believe. I jsut learned Yankee Hill makes them bu they are way to expensive, around 200. Trying to keep it under 100 if possible.

          I bought an eo tech holo sight and i noticed the front sight kinda gets in the way for me sometimes.
          When you learn how to use an EOtech properly, the front sight will practically disappear from view while you're shooting.

          The A2 on your gun is properly aligned and pinned to the barrel for strength. Replacing it is silly.

          Two-eyes open, focus on your target, ignore the front sight. Your brain will make it disappear.

          People spend WAAAAY too much money trying to "fix" things like the A2 sight, or replacing what came with the upper for free with something that costs tons.
          Please read the Calguns Wiki
          Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man.
          --Cesare, Marquis of Beccaria, "On Crimes and Punishment"

          Comment

          • #6
            Chontkleer
            Senior Member
            • Feb 2011
            • 1197

            jujubeez, if you're the gunsmith that I dropped my ar with a few days ago, I'm going to kick your ***.

            I like to be able to shoot for distance out to 400 yards or so. I have a 1.1-4 power red dot scope on the rifle and the front site did keep bugging me no matter how much I tried to ignore it. So switching out for a flat rail gas block.

            The front site post is usually attached by roll pins, that usually need to come out in a certain direction, with a surprising amount of force. You need to know what you are doing because if you put the gas block on yourself you might not have the gas tube aligned correctly (or you've otherwise damaged it) and then the function of the gun is off. Some people just grind off the top of the sight and then touch it up with black paint, but then you don't have a place to mount a flip up sight.

            Comment

            • #7
              CHS
              Moderator Emeritus
              CGN Contributor - Lifetime
              • Jan 2008
              • 11338

              Originally posted by Chontkleer
              The front site post is usually attached by roll pins
              Correct installation uses taper pins.

              Stag installs theirs backwards from everyone else.

              Some lower-end manufacturers use straight pins.

              LMT for some odd reason also uses straight pins.

              The only upper I've ever seen in my entire life that used actual roll pins was the crappiest Olympic upper you could imagine. I was surprised the thing even ran, which it may not have, now that I think about it.
              Please read the Calguns Wiki
              Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man.
              --Cesare, Marquis of Beccaria, "On Crimes and Punishment"

              Comment

              • #8
                Chontkleer
                Senior Member
                • Feb 2011
                • 1197

                Originally posted by CHS
                Correct installation uses taper pins.

                Stag installs theirs backwards from everyone else.

                Some lower-end manufacturers use straight pins.

                LMT for some odd reason also uses straight pins.

                The only upper I've ever seen in my entire life that used actual roll pins was the crappiest Olympic upper you could imagine. I was surprised the thing even ran, which it may not have, now that I think about it.
                Yes, inaccurate language. Some guy on the internet says that Smith and Wesson M&P's also go right to left.

                Comment

                • #9
                  SocomM4
                  Senior Member
                  • Oct 2010
                  • 2187

                  Yeah CHS, nobody in their right mind would want a flip up front sight ...


                  If its in your way, there are risers that raise the eotech up .
                  Last edited by SocomM4; 04-27-2012, 7:21 AM.
                  Originally posted by TeddyBallgame
                  maybe I'm wrong, but, if a $50.00 investment can help me a bit, i'll just have to go a day without the hookers and blow to cover it
                  Originally posted by ir0nclash86
                  I would wipe it off for the simple fact of not wanting to get sprayed in the face with it during the first few rounds.
                  Originally posted by Ride Madone
                  It does not matter.An AR is the very best and safest weapon to use for home defence.

                  Comment

                  • #10
                    krisjon
                    Member
                    • Jun 2011
                    • 379

                    Originally posted by jujubeez
                    Yes, I have an A2 gas block I believe. I jsut learned Yankee Hill makes them bu they are way to expensive, around 200. Trying to keep it under 100 if possible.

                    I bought an eo tech holo sight and i noticed the front sight kinda gets in the way for me sometimes.
                    You could always check out a 1/3 co-witness riser for your Eotech and just keep your FSB. Both LaRue and YHM make ones that raise your Eotech 7mm and puts the irons in the lower 1/3 of the site window. A lot of people running RDS run this over absolute co-witness (which is what you currently have).

                    While it's true that the front post does sort of disappear with proper shooting technique, starting with a more open site picture to begin with isn't a bad thing, either.

                    Comment

                    • #11
                      Josh3239
                      Calguns Addict
                      • Dec 2006
                      • 9200

                      I have to disagree with some of the other posters. The fixed front sight is an archaic old appendage that belongs on a rifle from the 60's. Most folding sights I'd say could take more of a beating than the fixed sights and they are more practical IMO. I am with you OP, I dislike co-witnessing. I've taken a 14.5'' co-witnessed Aimpoint out to 300 easily, its not that I can't. Its that I dislike it. Just like people don't like "busy" scope reticles, I don't like a hulking post in my scope.

                      Probably the cheapest and easiest way to do this is to take a dremel and cut of the front sight. Smooth it down and paint it black. Attach railed handguards if you don't already and throw a folding sight on there. ARF has a tutorial approximately 3/4 of the way down the page. MBUS is a cheap option.

                      Otherwise you can get a gas block that is railed or has a front sight attached to it, but that is a bit more work. Not hard, but more work.

                      Originally posted by CHS
                      The only upper I've ever seen in my entire life that used actual roll pins was the crappiest Olympic upper you could imagine. I was surprised the thing even ran, which it may not have, now that I think about it.
                      That just cracked me up, roll pins on a gas block.
                      Last edited by Josh3239; 04-27-2012, 12:24 PM.

                      Comment

                      • #12
                        TNP'R
                        Calguns Addict
                        • May 2010
                        • 7832

                        Originally posted by SocomM4
                        Yeah CHS, nobody in their right mind would want a flip up front sight ...


                        If its in your way, there are risers that raise the eotech up .
                        I do agree with CHS that once you practice the front sight post should go away. I don't notice it at all when I shoot and its even less of an issue at night.

                        Comment

                        • #13
                          SocomM4
                          Senior Member
                          • Oct 2010
                          • 2187

                          Should? Lol really? No, it never go's away.

                          But I will say , chopping the a2 sight off and leaving the pinned gas block is the most reliable and cheapest option.
                          Originally posted by TeddyBallgame
                          maybe I'm wrong, but, if a $50.00 investment can help me a bit, i'll just have to go a day without the hookers and blow to cover it
                          Originally posted by ir0nclash86
                          I would wipe it off for the simple fact of not wanting to get sprayed in the face with it during the first few rounds.
                          Originally posted by Ride Madone
                          It does not matter.An AR is the very best and safest weapon to use for home defence.

                          Comment

                          • #14
                            rgs1975
                            Senior Member
                            • Oct 2005
                            • 1933

                            Here's what I did to mine. Gives you the flip down function and the A2 look when in the up position. Works like a champ.





                            Last edited by rgs1975; 04-27-2012, 2:28 PM.
                            It's too late, it's over.

                            Comment

                            • #15
                              strongpoint
                              Veteran Member
                              • Dec 2010
                              • 3115

                              Originally posted by jujubeez
                              Yes, I have an A2 gas block I believe. I jsut learned Yankee Hill makes them bu they are way to expensive, around 200. Trying to keep it under 100 if possible.
                              where are you seeing them for $200? YHM sells them direct from the website for $102 basic, $132 with an underslung rail section. (i'm selling one of the latter ... PM me if you're interested.)


                              Originally posted by rgs1975
                              OP, that's the ARMS #41-BL (i think i see the bayonet lug) -- great gas block/flip sight, goes for about $150 online.

                              nice photos, rgs1975; you should have a close-up with the sight deployed. what's that wrapped around the barrel under the gas block?
                              .

                              Comment

                              Working...
                              UA-8071174-1