stag

[surfinguru]

2h upper and LPK on a High-Standard (HSA-15) lower, which is manufactured by Continental Machine Tool, who also makes Stag's lowers, so I guess you "could" say it's all Stag.

[CHS]

I think the hammer and trigger are still a Stag
Most of the LPK is Colt by now

WHAT??? Why?

The trigger, hammer, and disconnector are probably the single most important things in the LPK. If you're replacing with Colt parts, why replace all the useless parts first?

[dieselpower]

CMMG is fine for uppers IMHO. My threads were good. The upper isnt warped, it doesnt flake and the anodizing is thick and proper. matches the stag lower nearly perfact after a few months.

[dieselpower]

WHAT??? Why?

The trigger, hammer, and disconnector are probably the single most important things in the LPK. If you're replacing with Colt parts, why replace all the useless parts first?

there was nothing wrong with them. You are correct both are due to be changed out. I will change them with Colt parts soon.

I considered the springs and pins more important so they got changed out first

[Grumpyoldretiredcop]

Had a Stag lower, purchased from a Calgunner with no upper to go with it. When the M4Store advertised 0H uppers for $445, I bought one. Makes a good basic featureless rifle and cost quite a bit less than Stag MSRP when it was all said and done. Not a fanboy, but they make decent (although not top of the line) gear.