I just cleared an Avocado tree out of my backyard and thinking about maybe making some handgun grips out of some of the wood. I've never tried this before anyone have any suggestions?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Making Grips
Collapse
X
-
make sure to let the wood dry out...because the journey is the worthier part...The Shepherd's TaleComment
-
Grips are a fun project
look for a burl section of wood. Essentially a wood 'wart' or 'tumer' it is a lump in the trunk or branch with confused grain. These make the prettiest items. Saw out the section you want so it is more than 2 times thick then saw this piece in half so that you have matching grain on each side. Paint some wax or paint on the end grain so that it wont dry too fast and split. Keep in a dry place like closet stored so that air can circulate around it. Wait until seasoned then finish your grips.Comment
-
the 1911 panels should be relatively easy...the blackhawk quite a bit harder, because you need to fit on 2 planes...because the journey is the worthier part...The Shepherd's TaleComment
-
1911 grips are very easy to make if you have the right equipment. I make them out of exotic hardwoods. The other will be more difficult but not out of the question. Follow the above advice about drying the wood before you cut it. I would let it dry for over a year. Where abouts do you live?"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety."
~Ben Franklin
159Comment
-
Well, you are going to have to let the wood dry for at least a couple of years, make sure you start off with a piece at least 2' long and wax the ends or it will try to fast and leave you with firewood.www.culinagrips.com
"custom grips for shooters by shooters"Comment
-
I can not believe that this is the only picture I can find at the moment of some of my custom grips. I will try to find some more later. These are actually made of lacewood which is a semi exotic soft wood. It is fairly easy to work with. The wood I have made the most grips out of is purpleheart which is a very hard exotic wood. I really like the color of it. I actually traced out a dozen or so 1911 grips the other day but have not started cutting. I just have not had time. But these will be made out of East Indian rosewood and ebony. Both of those woods are endangered species. I was very lucky to get my hands on some of both of these woods.
"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety."
~Ben Franklin
159Comment
-
Originally posted by FalconLairI weep for my country and what it is becoming.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,815
Posts: 25,176,295
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 26316 users online. 162 members and 26154 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment