loads for .40S&W 200gr RN FMJ

[shooterx10]

Please give me your recipies (brand of powder in grains, OAL, etc.) for .40 S&W 200 grains RN FMJ (not lead). Also, give me your velocities (in ft/sec) too. If you use WSF, W231, or IMR 4675, that would be a plus!

Thanks!

[shooterx10]

Please give me your recipies (brand of powder in grains, OAL, etc.) for .40 S&W 200 grains RN FMJ (not lead). Also, give me your velocities (in ft/sec) too. If you use WSF, W231, or IMR 4675, that would be a plus!

Thanks!

[Ted_Bell]

I've never seen a 200gr 40 s&w load. That's pretty much the upper limit for 10mm, so you may have a tough time getting it to fit in a 40, and then your velocity would probably be really low.

[gobabygo]

There are lots of 200gr .40 loads listed here:

http://home.columbus.rr.com/jmaass/ipscload.htm

Disclaimer, disclaimer, start 10% below and work up, different guns/barrels will produce different results, etc.