dpms kit

[glockk9mm]

Is the DPMS lower parts kit anygood?

[Sydwaiz]

Works for me! Cheap too.

[Japedo]

They're okay if you like pounding in the bolt release and trigger guard pins, and dealing with the wandering trigger pins. I suggest go with RRA or Stag's

[glockk9mm]

Where is a good place to buy online? What shop do you guys recomend?

[1911whore]

dpms

I ahve not had any issues with mine. works fine. trigger is a bit heavy and has a bit of creep but if you are building an M4gery you dont need a slick trigger. you want slick trigger go gieselle

[Scope]

I used a DPMS LPK on my recent build. I had to bang the hell out of the trigger guard roll pin to get it to go in, and ended up scratching my OLL a little bit. The other parts seem fine. I would not use their LPK again, though.

[WokMaster1]

Where is a good place to buy online? What shop do you guys recomend?

All the vendors on this site carry them or at least most of them. CWS, 10%, Chris Bieling, etc. All good people. Remember cheap equals cheap in some cases. Stick to Stag & Rock River Arms for your first builds. Once you know what you're doing, the sky is the limit.

[mltrading]

The comments on DPMS LPKs are pretty extreme. Some people feel DPMS LPKs are very good and in good value. Some people just hate DPMS LPKs.

Just hit the search button and do some research. You will find a lot of discussions about DPMS LPKs.

My suggestion is, spend $10 more to get a RRA or STAG LPK. You'd be trouble free.

[Ratters]

Mine came with fuxord roll pins. Plus the triggers kinda suck. My Del-ton kit was much nicer in all respects. But yeah, well worth it to get the RRA or Stag.

[grammaton76]

Is the DPMS lower parts kit anygood?

DPMS's QA seems to be a bit lacking. Sometimes you'll get an LPK that's just as good as Stag... other times, you'll get one with some out of spec parts. No real rhyme or reason behind it that I've seen...

[JesseXXX]

I just got a DPMS kit.... should I return it and get Stag them...?

[marksbb]

No, it'll be fine.