Tweet
What would cause my firing pin to not strike hard enough? I had 3 back to back failure to fires and the bolt was forward all the way. It is a Dennys super duty bcg and I am firing brass cased ammo. I had more FTF during the day but the three back to back and was finished
-
-
is your hammer spring old, worn?(\__/)
(='.'=)
(")_(") Copy and paste this bunny into your signature to help him gain world domination.!!! -
Reloads? Often the primer is not seated all the way, cushioning the hit.
Make sure the tip of the firing pin is not damaged.
Hammer spring not inserted correctly. Both legs MUST be on top of the trigger pin."A nation can survive its fools, and even the ambitious. But it cannot survive treason from within. An enemy at the gates is less formidable, for he is known and carries his banner openly. But the traitor moves amongst those within the gate freely, his sly whispers rustling through all the alleys, heard in the very halls of government itself...A murderer is less to fear. The traitor is the plague."......CiceroComment
-
short or broken firing pin ?"I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it." - Thomas JeffersonComment
-
Probably what Army said about the spring legs. Check that first as it is quite
common sadly."I kill things for a living, don't make yourself one of them"Comment
There are currently 5308 users online. 29 members and 5279 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment