Maglock for Springfield Saint Victor in .308

[CartridgeCalls]

Anyone know of any maglocks that will work for this AR10 platform? I asked King Pin and they said possibly a Gen 4 kit will work but seeing what others are using before I spend the money.

Want to do away with the fin grip and fixed stock ASAP. Deer/pig season is here and I want to use this rifle this year.

[enorbit3]

Have you checked maglatch?

[CartridgeCalls]

Have you checked maglatch?

Yes, they were unsure if their product would fit.

[CartridgeCalls]

No other suggestions?

[G_FNH57]

Kingpin and Maglock Gen 4 work on my AR15

[enorbit3]

AR-15 is different than an AR-10

[CartridgeCalls]

AR-15 is different than an AR-10

You are correct. So far no manufacturer can confirm without a doubt if it will fit.

[SSOUNN]

Like all my AR-15’s, I went with a Hogue Freedom Fighter kit m/King Pin.. How you asked I modified the hogue fixture to drill/tap the holes

[CartridgeCalls]

Like all my AR-15?s, I went with a Hogue Freedom Fighter kit m/King Pin.. How you asked I modified the hogue fixture to drill/tap the holes

Mine would be an AR10 platform.

[SISKIN]

When I was in California I was using these

https://armaglock.com/product/kingpin-ar-maglock-ar-10-308-kingpin/

https://armaglock.com/product/ar-maglock-ar-10-308-gen-4-narrow-receiver-width-shorter-length-shaft-2/

[SSOUNN]

Mine would be an AR10 platform.

Meant to say Like all of my AR-15?s I went with the Hogue/Freedom Kit for my AR-10.. if you?d like some more detail shoot me an IM/EMAIL..

[CartridgeCalls]

When I was in California I was using these

https://armaglock.com/product/kingpin-ar-maglock-ar-10-308-kingpin/

https://armaglock.com/product/ar-mag...ength-shaft-2/

I contacted them and they stated they will not work for the saint ar10

[CartridgeCalls]

Still nothing found that will work.

[enorbit3]

can you measure the width of the mag catch area where the maglatch would go?

ETA: I use a type 2 on my Aero M5.

Then you can order the correct size, or maybe even trim one to size if you purchase the largest one...

[CartridgeCalls]

Thanks for the info. I'll measure it when I get home.