Unconfigured Ad Widget

Collapse

MP5 Reverse Stretch Locking Piece Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • beanz2
    I need a LIFE!!
    • Nov 2008
    • 12035

    MP5 Reverse Stretch Locking Piece Question

    So I have a POF 5PK pistol I'm planning to run an 80 degree locking piece on. I believe it's a clone of the HK MP5 Reverse Stretch:


    Question: Do I need an MP5 or MP5K locking piece for it? The 80* LP for the MP5K is just hitting the shelves at HKParts and RTGParts.
    sigpic
    The wife will be pissed, but Jesus always forgives.
  • #2
    spfabrication
    Senior Member
    • Aug 2015
    • 1045

    AFAIK only the shortened receiver K models need the 80deg locking piece to run suppressed and\or with a stock and 147 or higher grain bullets. Since the reverse stretch has a full length receiver and recoil assembly it can run the stock 100deg LP. I use an 80deg in my 9kt suppressed with a stock and it shoots soft. I was using the 110deg LP that came with it for a long time with no ill effects but I changed it to see how it felt and I like it better. I did have to change the rollers to -4 size since the LP change also opened up the bolt gap a little.
    GO NAVY

    Comment

    • #3
      hitdank
      Member
      • Dec 2013
      • 370

      I have vector reverse stretch and it says 110, a coharie pinned barrel rifle and it says 100. The piece appears to be standard between all mp5 and the 80 seems to be designed for the SD because of the perforated barrel. The degree has to do with slope and higher numbers delay the action a little longer.

      Comment

      Working...
      UA-8071174-1