Unconfigured Ad Widget

Collapse

Whole lotta brass...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • D1911
    Senior Member
    • Dec 2005
    • 1107

    Whole lotta brass...

    So, a while back, I bought a '62 Plymouth Fury to tinker with. It's a hardtop with a punched out 413 and typewriter drive Torqueflite trans and was completely gone through (ground up) in 2014. I live in an old house with a detached garage that measures 20'X20', that's full of stuff (but my Accord and my wife's Pilot will fit). I didn't realize how big the Fury was so a garage cleanup and rearrange was in order to make room. I knew I had some brass stashed away but when I pulled a couple of large containers out from under my workbench, this what I found. I literally have hundreds (if not thousands) of once fired brass in .45 Auto, .38 Special, .357 Magnum, and .44 Magnum (I think there's a bit of 9mm also). I even found some hard cast .44, .357, and .38 wadcutter bullets, as well as a few hundred each of small and large pistol primers. The primers have been in an enclosed plastic container for years and look great. Think they're still useable?





  • #2
    lastinline
    Senior Member
    • Feb 2014
    • 2364

    That’s a good start.

    Comment

    • #3
      nstoolman1
      Member
      • Dec 2010
      • 279

      No. They are not. You have a time bomb. Send them to me and I will take the risk for you.

      JK. Great find.

      Comment

      • #4
        SkyHawk
        I need a LIFE!!
        • Sep 2012
        • 23523

        Prime one of those empty brass, put it in a gun and see if it goes bang out in the garage - and you will have a good idea if the primers are still good or not. If anything killed them it would have been the summer heat

        If you want to part with any 44 mag brass/projectiles let me know
        Last edited by SkyHawk; 09-17-2022, 10:02 PM.
        Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

        Comment

        • #5
          racinjason233
          Senior Member
          • Apr 2015
          • 1456

          I would throw them in the trash can. I’ll bring the can and dispose of them properly
          Originally posted by smashycrashy
          Damn, you are right, I suck
          Originally posted by OleCuss
          I despise Trump.

          Comment

          • #6
            Mark49
            Senior Member
            • Feb 2008
            • 1153

            The casings all look super clean to me, you had them locked in dry storage you should be fine. Dry climate, its moisture that is the killer, not the heat.

            I have original Pre WW-ll ammo that all fire fine. I live in the desert of So Cal.

            Great find... I misplaced my wife 11 years ago and like you forgot all about it :-)

            Comment

            • #7
              bergmen
              Senior Member
              • May 2011
              • 2488

              Originally posted by SkyHawk
              Prime one of those empty brass, put it in a gun and see if it goes bang out in the garage - and you will have a good idea if the primers are still good or not. If anything killed them it would have been the summer heat

              If you want to part with any 44 mag brass/projectiles let me know
              SAAMI (Sporting Arms and Ammunition Manufacturers Institute) published a leaflet on primers and part of this covers heat and humidity:



              It is about 7 pages long in total. I have attached it for everyone's benefit.

              Dan
              Last edited by bergmen; 07-01-2023, 12:52 PM.

              Comment

              • #8
                70runner
                Senior Member
                • Dec 2013
                • 783

                Congrats on the Fury. Love the old pushbutton 727. IIRC the 62s had a park lever.

                Comment

                • #9
                  SkyHawk
                  I need a LIFE!!
                  • Sep 2012
                  • 23523

                  Originally posted by bergmen
                  SAAMI (Sporting Arms and Ammunition Manufacturers Institute) published a leaflet on primers and part of this covers heat and humidity:



                  It is about 7 pages long in total. I have attached it for everyone's benefit.

                  Dan

                  Thank you, very handy. I did not have a thermometer in my garage last week when it was 116 out, but it felt like 140 in there
                  Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

                  Comment

                  • #10
                    Jimi Jah
                    I need a LIFE!!
                    • Jan 2014
                    • 18842

                    I pick up my .22lr brass and sell it to the recyclers. It's worth laying out a blanket to catch that stuff and I don't like leaving anything behind.

                    Centerfire is saved for reloading.

                    Comment

                    • #11
                      VictorFranko
                      I need a LIFE!!
                      • Jan 2010
                      • 13737

                      Pics of the '62 Fury?

                      Comment

                      • #12
                        Kurgan
                        Veteran Member
                        • Dec 2012
                        • 4300

                        Components aren't milk. They don't really have an expiration date as long as it's kept dry.
                        My mother always told me to be careful what you ask for.

                        Just one more piece of parental advice I stupidly ignored.

                        <shrug>

                        Comment

                        • #13
                          D1911
                          Senior Member
                          • Dec 2005
                          • 1107

                          Originally posted by VictorFranko
                          Pics of the '62 Fury?




                          Comment

                          • #14
                            alpha_romeo_XV
                            Veteran Member
                            • Jun 2006
                            • 3025

                            Just wet tumble that brass and it will look like brand new.

                            Comment

                            • #15
                              Che762x39
                              Veteran Member
                              • Aug 2011
                              • 4538

                              You are good to go for reloading.

                              I love the '62. Thank you for sharing.

                              Comment

                              Working...
                              UA-8071174-1