Unconfigured Ad Widget

Collapse

Parallel Offset Zero Validation - IR devices with no vis laser

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MarikinaMan
    Veteran Member
    • Nov 2015
    • 4864

    Parallel Offset Zero Validation - IR devices with no vis laser

    A year ago, I posted on a process to make parallel offset zero sighting targets.

    Its here - https://www.calguns.net/calgunforum/...arallel+offset

    Over the last year, I had it ready, but didnt have an opportunity to use the targets. Convergent zeros work so it wasnt a necessity.

    I had an opportunity to shoot with some guys who had time, so I set up my paper stands and did it.

    It took a total of 12 rounds. Four rounds of 3 shots each. The Bullseye is the perfect circle in the center.

    1st volley, Elevation was perfect Windage is off 3 inches to the left.

    2nd volley - I turned Windage clockwise 1/8 inch, and got 1/2 inch movement at my AK zero distance (19.5 yard). But it moved up a 1/2 inch too, huh?

    3rd volley - I turned Windage 1/2 turn plus another 1/8, and my windage is was perfect, but then my elevation went up 2 inches. Huh? Damn Russians are loco.

    4th volley - I turned down my elevation 3/4 turn, and got to the Bullseye perfectly. Well done

    Not bad for self learning how to zero an aiming device you literally can't see. And the darn thing groups well too!

    I validated the zero to 100 and 200 yards. Its really cool to hear steel ring out in the middle of darkness.

    Unfortunately, I could make out the steel plates with unmagnified goggles at 300 yards I'm gonna have to figure out how to put up a target I can see at 300 yards and over. 200 yards accuracy is not enough of a justification for the exercise, over what a convergent zero can accomplish.



    Last edited by MarikinaMan; 01-16-2022, 9:37 AM.
Working...
UA-8071174-1