Unconfigured Ad Widget

Collapse

Will this case fit my two pistols...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MiguelS
    Member
    • Jun 2009
    • 486

    Will this case fit my two pistols...

    Even though it is meant for a different brand, should a Sig P226 and a Sig Mosquito fit in it?




    Thanks.


    Thinking they are using a 1500 model container.
    Sig P220-BSS .45ACP, Sig P226-BSS .40cal(refinished), Sig P6 9mm (refinished)
  • #2
    rkt88edmo
    Reptile&Samurai Moderator
    CGN Contributor - Lifetime
    • Dec 2002
    • 10058

    both should fit. If the config they use is too tight just flip one so the barrel are pointing to opposite sides and omit the mags.
    If it was a snake, it would have bit me.
    Use the goog to search calguns

    Comment

    • #3
      MiguelS
      Member
      • Jun 2009
      • 486

      Well, if they are using the 1500 case and it costs about $105, while the M9 Double is $132 with cut outs...just thought it would look cleaner.
      Sig P220-BSS .45ACP, Sig P226-BSS .40cal(refinished), Sig P6 9mm (refinished)

      Comment

      • #4
        emilio
        Member
        • Jun 2009
        • 393

        probably would fit both of those, unless the Mosquito has the comp. still, it's just foam and is easy to customize.

        the 1500 series are the larger cases, more like carry-on size. i think this might be based on the 1200 or 1450. i suggest you save a good bit of cash and just buy a 1200 (<$50) or 1450 (<$100) that has the full foam, then you can customize it for your specific need. you can pick the right one by laying out on a table everything that you want to put in the case, then arranging it so there's at least 1/2" between objects. measure the rectangular dimensions of that and add 1/2-1" on each edge, and you have your dimensions.

        excellent choice, though. Pelican makes great products, right here in California, and they have a no-nonsense lifetime guarantee (except for bears and children under 3).
        - emilio
        Last edited by emilio; 06-24-2009, 9:17 PM. Reason: punctuation

        Comment

        • #5
          MiguelS
          Member
          • Jun 2009
          • 486

          Well I know for the Single Case they sell for the P228 it is a 1400 size case.

          Dimensions are given in the listing.



          So I am thinking they need a 1500 for a two pistol. I like the fact that the foam is hard and not the soft type.

          I have three pelican cases from my ol previous job...used to travel with critical parts around the world...I was able to keep them..

          I just emailed them to see if my guns will fit.

          Sig P220-BSS .45ACP, Sig P226-BSS .40cal(refinished), Sig P6 9mm (refinished)

          Comment

          • #6
            MiguelS
            Member
            • Jun 2009
            • 486

            Well the case is a 1450. seems it is time to buy one of those...I am going to cut it out myself.
            Sig P220-BSS .45ACP, Sig P226-BSS .40cal(refinished), Sig P6 9mm (refinished)

            Comment

            Working...
            UA-8071174-1