Unconfigured Ad Widget

Collapse

Reloading cleaning brass

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cliffer
    Banned
    • May 2021
    • 10

    Reloading cleaning brass

    So I'm thinking of switching from an ultrasonic cleaner to rotary wet tumbling my brass. (fast vs really clean) my concern is I always deprimed and resize my brass before cleaning will I need to resize necks after rotary tumbling due to all the banging around in the tumbler or should there be no difference.
  • #2
    ohsmily
    Calguns Addict
    • Apr 2005
    • 8997

    Originally posted by Cliffer
    So I'm thinking of switching from an ultrasonic cleaner to rotary wet tumbling my brass. (fast vs really clean) my concern is I always deprimed and resize my brass before cleaning will I need to resize necks after rotary tumbling due to all the banging around in the tumbler or should there be no difference.
    The tumbling will not affect the sizing. But why the F would you decap and resize dirty brass? Talk about hard on dies.

    I clean the brass and then run it through my 1050 and come out with loaded rounds on the other end. Even if I was doing multiple passes through a press I would still clean first. Cleaner for the press, dies, etc.
    Expert firearms attorney: https://www.rwslaw.com/team/adam-j-richards/

    Check out https://www.firearmsunknown.com/. Support a good calgunner local to San Diego.

    Comment

    • #3
      SharedShots
      Senior Member
      • Feb 2021
      • 2277

      Originally posted by ohsmily
      The tumbling will not affect the sizing. But why the F would you decap and resize dirty brass? Talk about hard on dies.

      I clean the brass and then run it through my 1050 and come out with loaded rounds on the other end. Even if I was doing multiple passes through a press I would still clean first. Cleaner for the press, dies, etc.
      You can do it for bolt guns as the brass doesn't get dirty. It's not hard on the dies. From some autoloaders the brass is almost as clean afterwards as it went into the magazine. Shot a bunch last week, (piston 220s subsonic) other than being empty it was hard to tell it wasn't as clean as after a quick tumble.

      I have some 223 and 308 dies decades old, still turn out great ammo and didn't tumble first. Then again, those cases weren't the ones hitting dirt and gravel nor being walked on.
      Last edited by SharedShots; 09-04-2021, 6:13 PM.
      Let Go of the Status Quo!

      Don't worry, it will never pass...How in the hell did that pass?

      Think past your gun, it's the last resort, the first is your brain.

      Defense is a losing proposition when time is on the side of the opponent. In the history of humanity, no defense has ever won against an enemy with time on their side.

      Comment

      Working...
      UA-8071174-1