Best Glock & CZ Customizer For The Money

[EliteCorp]

Hey Gents,

I have a Glock 17 Gen 3 that I have used in a couple of class, along with many range trips. I have well over 5000> rounds down range, and its worked well. But, I would like to add an RMR cut, stipppe job, undercuts, and a grip reduction to the pistol.

My question is, who should I send it to and who does the best work?

I also have a CZ P09 I would like to add an RMR too as well.

[naz]

I have used czc in the past and am happy with their work

As for Glock, to be honest, I added up the cost of all the things you are typing, and decided to just get a 320 instead

[elm3c]

Jeremy at Bent Line Laser Engraving does some amazing laser stippling and undercut work. He has a great eye for detail.

For RMR slide cuts, I'd recommend Battle Werx. I also added deeper serrations and black nitride for refinishing, and the work was very clean.

[BEE]

As far as optic cuts goes for both your CZ and Glock, I would suggest JagerWerks. You can see all of their work on their Instagram.

I highly suggest laser engraving/stippling polymer frames. Hand stippling is a thing of the past. 2 shops I've been eyeing if I ever had a Gen 3 Glock to modify are Bent Line Laser Engraving, and Americor Manufacturing. Their works can be seen on Facebook and/or Instagram.

Cajun Gun Works, and CZ Custom are also options for your CZ. Either CGW and CZC can modify your CZ to whatever you wish, optic cuts as well.

[Cup of Cheese]

I've seen their work first hand, and have a G19 on the waiting list.

https://laserbladeengraving.com

[EliteCorp]

Thanks guys.
What’s do you guys think of Zev? Is it worth the money?

[elm3c]

Here's my G20SF with laser stippling from Bent Line. Probably will be sending it to him again to add double undercut and other work as well.

Slide cut from Battle Werx. One thing I liked about their approach was that they use raised bosses for the dot sight mounting screws as well. Slightly smaller diameter screws would then be used (supplied by BW), but much more thread engagement. As BEE mentioned above, lots of people rave about the JagerWerks quality as well.

[TitanCi]

Here's my G20SF with laser stippling from Bent Line. Probably will be sending it to him again to add double undercut and other work as well.

Slide cut from Battle Werx. One thing I liked about their approach was that they use raised bosses for the dot sight mounting screws as well. Slightly smaller diameter screws would then be used (supplied by BW), but much more thread engagement. As BEE mentioned above, lots of people rave about the JagerWerks quality as well.

That looks fantastic.


Sent from my iPhone using Tapatalk