AR10 gas block recommendations needed

[ely]

AR10 in 308 need adjustable gas block.

Located in the Inland Empire and would appreciate your recommendation on a shop that I can purchase and have installed an adjustable gas block on my 16" upper.

Thanks in advance.

[NATEWA]

https://www.jprifles.com/buy.php?item=JPGS-5B

[NATEWA]

Easy to install yourself but any gunsmith can install it for you.

[NATEWA]

https://www.youtube.com/watch?v=Lr6BZl_uyNk

For once it’s on.

[C.G.]

AR10 in 308 need adjustable gas block.

Located in the Inland Empire and would appreciate your recommendation on a shop that I can purchase and have installed an adjustable gas block on my 16" upper.

Thanks in advance.

What type? Clamp on or not? Do you have dimples on the barrel? As mentioned above it is not that difficult to install one or you can ship it to AR15barrels, Randal can even pin it for you if you so desire.

[ely]

What type? Clamp on or not? Do you have dimples on the barrel? As mentioned above it is not that difficult to install one or you can ship it to AR15barrels, Randal can even pin it for you if you so desire.

First choice is to find a local shop in the I.E. . Hopefully I'll get a good recommendation .

I would not have a problem doing it myself, and have done so in the past. I'm looking for 100% reliability, and want to remove my inexperience from the equation.
I appreciate your reply.

[tabascoz28]

I have a cheap adjustable block that cost maybe 30 with bottom set screws and a set screw for the adjustment. I have other blocks for my other ARs with better adjustment screws with detents but in CA, since we can't have silencers, it's set and forget. Unless you'll be running all kinds of different ammo and just need it to be as soft kicking as possible. I always make my ammo the same. I haven't touched mine in 2 years since I found the right setting.