Unconfigured Ad Widget

Collapse

AR Pistol

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blkrifle223
    Member
    • Feb 2009
    • 271

    AR Pistol

    Hi Guys,

    Let me ask this question here, hoping will get better info.


    Thank you.
  • #2
    biglou
    Senior Member
    • May 2007
    • 1317

    CompMag

    Comment

    • #3
      Uncivil Engineer
      Senior Member
      • Nov 2016
      • 1101

      A compmag isnt expensive and really is easy to use.

      You might be able find cheaper options if you are looking to sell it. I've seen parts that replace the magazine release button or the bolt hold open that lock the magazine in.

      Since you are storing it now with the upper separate from the lower as you must without any of these compliance options installed. You can try selling it that way. Eg sell the upper. Then sell the lower. Without the upper I don't see how anyone could say it is or isn't in compliance. It you ended up selling both halves to the same guy you might point it he should go to fixed magazine before he attached the upper to the lower.

      Comment

      • #4
        blkrifle223
        Member
        • Feb 2009
        • 271

        Originally posted by Uncivil Engineer
        A compmag isnt expensive and really is easy to use.

        You might be able find cheaper options if you are looking to sell it. I've seen parts that replace the magazine release button or the bolt hold open that lock the magazine in.

        Since you are storing it now with the upper separate from the lower as you must without any of these compliance options installed. You can try selling it that way. Eg sell the upper. Then sell the lower. Without the upper I don't see how anyone could say it is or isn't in compliance. It you ended up selling both halves to the same guy you might point it he should go to fixed magazine before he attached the upper to the lower.

        Comment

        • #5
          tabascoz28
          Veteran Member
          • Mar 2016
          • 3364

          I would ask the FFL if they will do it. Some places won't, some don't understand the rules. You can sell the upper without the FFL so no fees. But the lower must be run through the system. There was one horror story about a guy who had his gun held by the FFL cause they said it was an assault weapon by CA definitions and it wasn't. Nicely insist on talking to the manager or owner to verify.

          Comment

          • #6
            blkrifle223
            Member
            • Feb 2009
            • 271

            Originally posted by tabascoz28
            I would ask the FFL if they will do it. Some places won't, some don't understand the rules. You can sell the upper without the FFL so no fees. But the lower must be run through the system. There was one horror story about a guy who had his gun held by the FFL cause they said it was an assault weapon by CA definitions and it wasn't. Nicely insist on talking to the manager or owner to verify.

            Comment

            • #7
              tabascoz28
              Veteran Member
              • Mar 2016
              • 3364

              I'm in Sacramento, Black Rifle in Orangevale did mine but it was a stripped lower.

              Comment

              • #8
                blkrifle223
                Member
                • Feb 2009
                • 271

                Originally posted by tabascoz28
                I'm in Sacramento, Black Rifle in Orangevale did mine but it was a stripped lower.

                Comment

                • #9
                  Uncivil Engineer
                  Senior Member
                  • Nov 2016
                  • 1101

                  If it's in a legal condition now you can sell it.

                  As others have stated picking a good FFL can make the process for easier.

                  Comment

                  Working...
                  UA-8071174-1