Unconfigured Ad Widget

Collapse

Flash hider vs muzzle brake

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LD1061
    Member
    CGN Contributor
    • Apr 2018
    • 287

    Flash hider vs muzzle brake

    I have googled for answers but still have not seen anything that makes me certain on how to tell the difference between hiders and brakes. I am going to change a rifle from mag locked to featureless and the device I purchased originally was sold to me as a brake . I have looked at numerous examples of each and I see similarities in each. Other than a threaded barrel protector what do I have to use for a featureless set up?
  • #2
    kcheung2
    Veteran Member
    • Aug 2012
    • 4387

    If you understand the physics then it's really straightforward, and all those debates about horizontal vs vertical slots is meaningless.

    Imagine a sailboat. The wind comes from aft and blows forward, and when it hits the sail it pushes the boat forward. A brake acts the same way, a sail with a hole in the middle for the projectile to pass through.

    The expanding gasses in the barrel are pushing forward, and when they escape the barrel they expand in a cone, and hit the baffles of the brake, thus pushing the gun forward a little. The simplest design is a tank brake (you can google for examples) & there is no mistaking the brake aspect of it because those baffles are huge to collect all the forward-moving force of the gases. They can be single chamber or multi, but since the purpose is to capture as much gas as possible & redirect it sideways, the bore opening would be just large enough for the projectile to safely pass.

    Compare that to a flashhider, like an A2 or even the old school 3 prong style. Those work by having slots that disperse the unburnt powder away from the boreline so that it cools quickly & doesn't burn. There is nothing for the gases to "catch" upon so it's not imparting any forward motion. Those also have large openings because the purpose is to disperse the gases.

    Where it gets iffy are those devices with a bunch of holes drilled through them laterally, and devices like the J-comp, but for different reasons. Those multi-holed things have some baffle qualities, and they also have some flash hiding qualities, but they do neither well.

    The J-comp (and the device on the CZ-805 Bren) on the other hand do both pretty well. The baffles work very well, but then there's the tines that protrude forward so it creates a large open area to dissipate unburnt powder. But it's that open muzzle area that makes some people consider it a flash hider.

    And finally, there's the legal answer: If the mfg calls it a flash hider (or claims it has any flash hiding ability) , that's what it is. Regardless of physics. Likewise, if the mfg calls it a brake, that's what it is.
    ---------------------
    "There is no "best." If there was, everyone here would own that one, and no other." - DSB

    Comment

    • #3
      LD1061
      Member
      CGN Contributor
      • Apr 2018
      • 287

      So........how do we convince LE that it is a brake if the situation presents itself?

      Comment

      • #4
        OCEquestrian
        Calguns Addict
        • Jun 2017
        • 6908

        The difference between a flash hider and a muzzle break? In free America there is no difference. Here in CA the difference is 10 years in prison.

        Originally posted by LD1061
        So........how do we convince LE that it is a brake if the situation presents itself?
        You wont get to argue the finer points of weapons design with the LEO arresting you. You get to argue the point with a prosecutor in front of a Judge. Better hope the NRA wants to help you. Are you a member?
        "Extremism in defense of liberty is no vice. Moderation in pursuit of justice is no virtue." ----Sen. Barry Goldwater

        Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." ----Benjamin Franklin

        NRA life member
        SAF life member
        CRPA member

        Comment

        • #5
          LD1061
          Member
          CGN Contributor
          • Apr 2018
          • 287

          Lifetime!!!

          Comment

          • #6
            Lucky Scott
            Veteran Member
            • Dec 2008
            • 2612

            I have been told, but don't know if it is 100 percent true.
            Brake will have the end sealed except for the hole that the bullet goes thru. Flash hider will be completely open at the end.

            Comment

            • #7
              LD1061
              Member
              CGN Contributor
              • Apr 2018
              • 287

              Sounds like a thread protector will be a safe bet!!!
              Now......how about the angled grips that put your thumb above the trigger.....

              Comment

              • #8
                M1NM
                Calguns Addict
                • Oct 2011
                • 7966

                If the manufacturer calls it a brake - it's a brake. End of subject.

                Comment

                • #9
                  Mayor McRifle
                  Calguns Addict
                  • Dec 2013
                  • 7797

                  Originally posted by LD1061
                  So........how do we convince LE that it is a brake if the situation presents itself?
                  Tell them it’s a brake. If necessary, have them look up the model on the internet and see for themselves.
                  Anchors Aweigh

                  sigpic

                  Comment

                  • #10
                    LD1061
                    Member
                    CGN Contributor
                    • Apr 2018
                    • 287

                    So.......I carry a receipt with the model number and description?

                    Comment

                    • #11
                      Mayor McRifle
                      Calguns Addict
                      • Dec 2013
                      • 7797

                      Originally posted by LD1061
                      So.......I carry a receipt with the model number and description?
                      No. It’s a brake. It’s not illegal.

                      Paranoia will destroy ya.
                      Last edited by Mayor McRifle; 05-12-2019, 10:20 PM.
                      Anchors Aweigh

                      sigpic

                      Comment

                      • #12
                        LD1061
                        Member
                        CGN Contributor
                        • Apr 2018
                        • 287

                        So......everything is a brake ?

                        Comment

                        • #13
                          Mayor McRifle
                          Calguns Addict
                          • Dec 2013
                          • 7797

                          Originally posted by LD1061
                          So......everything is a brake ?
                          No. Just buy a brake and install it on your rifle. See Post #8, above.
                          Anchors Aweigh

                          sigpic

                          Comment

                          • #14
                            ar15barrels
                            I need a LIFE!!
                            • Jan 2006
                            • 57202

                            Originally posted by LD1061
                            So........how do we convince LE that it is a brake if the situation presents itself?
                            By using a brake that is unquestionably a brake and nothing like a flash suppressor.
                            Randall Rausch

                            AR work: www.ar15barrels.com
                            Handguns: www.handgunbarrels.com
                            Bolt actions: www.700barrels.com
                            Foreign Semi Autos: www.akbarrels.com
                            Most work done while you wait on a scheduled shop visit.

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57202

                              Originally posted by LD1061
                              So......everything is a brake ?
                              Unless it's also a flash suppressor, then it's a flash suppressor.
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1