Self Manufactured Pistol Requirements

[eals112]

[edgerly779]

You are sol that ship sailed for polymers on 7/1/18

[olddirtygerm]

Doesn't have 3.7oz stainless embedded in it. You have no way to make it CA legal.

[eals112]

Doesn't have 3.7oz stainless embedded in it. You have no way to make it CA legal.

[BajaJames83]

build a P320 80%

[boopiejones]

[PyroFox79]

Build it and enjoy your life. Just be mindful of people poking around your business at the range.

[PyroFox79]

build a P320 80%

Have they come out with everything for the trigger groups yet? I havent followed up on them in a while. Last I looked it was like 120ish for the unbent undrilled housing and like another 150 for the jig. But no instructions on the process of bending and drilling.

[Cokebottle]

3.7oz of stainless is about 2" x 2" x 1/4"
That's not even going to work for an AR lower.

There is no way to complete a commercial Polymer 80% frame legally.

It is arguably no longer possible to complete *any* 80% build into a semiautomatic handgun.

[eals112]

[Cokebottle]

So I just have a $150 paper weight, $35+$19 donation to the California Gov’t... [emoji24][emoji30]

They are going to likely request photos of the build and will deny it.

[eals112]

They are going to likely request photos of the build and will deny it.

[jager56]

Just build an AR Pistol on an 80 much easier trying to mess with polymers.