Unconfigured Ad Widget

Collapse

Magazines fall out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • HawkMan
    Senior Member
    • May 2016
    • 549

    Magazines fall out

    I have a drop in Hahn Precision 9mm adapter as well as ASC AR-15 9mm Rifle 10-Round Stainless Steel Magazines

    With all of the magazines, they won't stay and they just fall out.
    Has anyone else had this issue or know how to fix it?

    UPDATE:
    Originally posted by HawkMan
    I found a way to fix the issue; however, I do not consider it to be the best method.

    I used a Flathead screwdriver to pry out the top of the hole in the magazine where the magazine catch catches.
    On the left is the modified magazine and the right has an original magazine.
    Magazine Picture (Imgur Link)

    The better method which is what I would like is a magazine catch that extends out more. I'm currently using the magazine catch which came with the Palmetto State Armory Classic Lower Parts Kit.
    Magazine Catch Picture (Imgur Link)
    Last edited by HawkMan; 07-22-2017, 12:57 PM.
  • #2
    Calico1404
    Veteran Member
    • Jan 2016
    • 3401

    Tighten up your mag release.

    Drop the conversion block in with the upper removed, look down into the well and make sure you are seeing enough of the mag release coming though the block to secure your mag.

    Comment

    • #3
      superhondaz50
      Veteran Member
      • Feb 2006
      • 3121

      Replace your mag catch with a genuine colt part. Most all LPK's now have crappy cast catches that don't hold mags well. I guarantee that's your issue. There are several other threads covering this issue as well.
      Originally Posted By CTbuilder1 @ arfcom:
      A lot of time and energy goes into thinking up ways to make perfectly good rifles into something dumb. Single shot ARs are gay. AR pistols are also gay. Just my opinion, of course, but a single shot AR pistol would be an AIDS cannon.

      Comment

      • #4
        HawkMan
        Senior Member
        • May 2016
        • 549

        Originally posted by Calico1404
        Tighten up your mag release.

        Drop the conversion block in with the upper removed, look down into the well and make sure you are seeing enough of the mag release coming though the block to secure your mag.
        Tightening it did nothing except make the screw protrude out from the button.

        Originally posted by superhondaz50
        Replace your mag catch with a genuine colt part. Most all LPK's now have crappy cast catches that don't hold mags well. I guarantee that's your issue. There are several other threads covering this issue as well.
        I think this may be the case, the Colt magazine has a little bit of wiggle room and the magazine catch is probably a millimeter out from the face of the Hahn adapter.

        Are the colt mag releases extended on the inside?
        Also, any recommendation of one to buy?

        The current mag release I'm using is the one from the Palmetto State Armory Lower Parts Kit.
        Last edited by HawkMan; 07-20-2017, 1:10 PM.

        Comment

        • #5
          langss
          Senior Member
          • Dec 2009
          • 929

          I believe the one in my 9mm is a Rock River, but the idea is the same. I initially thought I could just install it like a regular "Magazine", tighten up the retaining screws and be good to go...... WRONG. It took some serious playing with everything + the coating on the ASC mag's is a problem, but I didn't find that out until later. So here is what I did. I installed the Mag Block....tight enough to not just fall out. Then I put the Mag Catch in and adjusted it so the ASC Magazines would catch and release. Now this is going to take you some time, but you speed things up if you take a Deburring Tool(a small flat blade screwdriver will work, it just takes longer) and scrape all the coating from the "INSIDE" area right on the edge of the "Hole" for the "Magazine Catch"(the part I found out later). For some reason the coating hangs up anything it comes in contact with except the Mag Well. Once you have everything adjusted to your satisfaction, you can tighten the retaining screws on your Mag Block(if that's how its retained) and you should be good to go. Another little tip is the Feed Lips also have this coating on them and again depending on your application, may cause your bolt to hang or a variety of other little things that will have you chasing your tail......been there done that. I have a little over 2000 through mine now and other than I wish I could use the UZI mags I have, its a fun gun. Everybody that shoots it likes it. Now I have to make it Featureless....which really sucks. Oh Well I hope this helps you.

          Comment

          • #6
            HawkMan
            Senior Member
            • May 2016
            • 549

            Originally posted by langss
            I believe the one in my 9mm is a Rock River, but the idea is the same. I initially thought I could just install it like a regular "Magazine", tighten up the retaining screws and be good to go...... WRONG. It took some serious playing with everything + the coating on the ASC mag's is a problem, but I didn't find that out until later. So here is what I did. I installed the Mag Block....tight enough to not just fall out. Then I put the Mag Catch in and adjusted it so the ASC Magazines would catch and release. Now this is going to take you some time, but you speed things up if you take a Deburring Tool(a small flat blade screwdriver will work, it just takes longer) and scrape all the coating from the "INSIDE" area right on the edge of the "Hole" for the "Magazine Catch"(the part I found out later). For some reason the coating hangs up anything it comes in contact with except the Mag Well. Once you have everything adjusted to your satisfaction, you can tighten the retaining screws on your Mag Block(if that's how its retained) and you should be good to go. Another little tip is the Feed Lips also have this coating on them and again depending on your application, may cause your bolt to hang or a variety of other little things that will have you chasing your tail......been there done that. I have a little over 2000 through mine now and other than I wish I could use the UZI mags I have, its a fun gun. Everybody that shoots it likes it. Now I have to make it Featureless....which really sucks. Oh Well I hope this helps you.
            There are no retaining screws as it is a top-loading adapter and tightening the magazine release doesn't help at all either.

            The problem seems to be that the magazines have enough wiggle room to fall off the magazine catch.

            Comment

            • #7
              langss
              Senior Member
              • Dec 2009
              • 929

              Originally posted by HawkMan
              There are no retaining screws as it is a top-loading adapter and tightening the magazine release doesn't help at all either.

              The problem seems to be that the magazines have enough wiggle room to fall off the magazine catch.
              Well Ok...I guess I cannot be any help to you. So it just sits in the Magwell ? That's interesting. See the way mine is, its rock solid, like it was Mfg that way...no wiggle no slop and the ASC Magazines fit the same. Even the UZI Mags I have fit nicely in the Mag Block, they just wont latch because the have not been modified. Maybe it has to be pinned like the Colts were. You might want to look into that. Just a thought since it just drops in couldn't you set the Mag Catch to work on a regular 5.56/.223 Magazine and then just drop the Mag Block in. Sorry, I don't know what else to tell you.

              Comment

              • #8
                HawkMan
                Senior Member
                • May 2016
                • 549

                Originally posted by langss
                Well Ok...I guess I cannot be any help to you. So it just sits in the Magwell ? That's interesting. See the way mine is, its rock solid, like it was Mfg that way...no wiggle no slop and the ASC Magazines fit the same. Even the UZI Mags I have fit nicely in the Mag Block, they just wont latch because the have not been modified. Maybe it has to be pinned like the Colts were. You might want to look into that. Just a thought since it just drops in couldn't you set the Mag Catch to work on a regular 5.56/.223 Magazine and then just drop the Mag Block in. Sorry, I don't know what else to tell you.
                The mag block doesn't wiggle, it drops in from the top and the mag catch helps hold it in place. The magazines wiggle a little inside the mag block. Taking a look online there isn't too much about this issue, but I believe I need to buy a 9mm mag catch for the AR which extends the catch out a little more.

                Comment

                • #9
                  superhondaz50
                  Veteran Member
                  • Feb 2006
                  • 3121



                  Here you go. Colt is a forged part, the catch sits deeper and has a sharper edge. The cheaper cast ones from there MFG has a shallow rounded edge.
                  Originally Posted By CTbuilder1 @ arfcom:
                  A lot of time and energy goes into thinking up ways to make perfectly good rifles into something dumb. Single shot ARs are gay. AR pistols are also gay. Just my opinion, of course, but a single shot AR pistol would be an AIDS cannon.

                  Comment

                  • #10
                    sigstroker
                    I need a LIFE!!
                    • Jan 2009
                    • 19993

                    Any chance of finding someone with a Colt? See if your mags work in his gun and vice-versa.

                    Comment

                    • #11
                      WartHog
                      Veteran Member
                      • Jan 2012
                      • 4640

                      OP - where are you located?
                      Originally posted by Sierra57
                      Civil War 2.0 - If it comes to pass, the America-hating Leftists will have brought it upon themselves. I value Freedom more than their sorry lives and the form of Governance they espouse, which offers no Freedom and complete servitude to the State.
                      "We have four boxes with which to defend our Freedoms: the Soap box, the Ballot box, the Jury box, and the Cartridge box" - Ed Howdershelt

                      Comment

                      • #12
                        HawkMan
                        Senior Member
                        • May 2016
                        • 549

                        Originally posted by superhondaz50
                        http://www.brownells.com/rifle-parts...891-10870.aspx

                        Here you go. Colt is a forged part, the catch sits deeper and has a sharper edge. The cheaper cast ones from there MFG has a shallow rounded edge.
                        Would it make sense to get the Colt catch, or should I try one of these?
                        RRA 9MM MAGAZINE CATCH
                        SPIKES TACTICAL MAG CATCH - 9MM ONLY

                        Originally posted by WartHog
                        OP - where are you located?
                        I'm in Los Gatos, Santa Clara County

                        Comment

                        • #13
                          langss
                          Senior Member
                          • Dec 2009
                          • 929

                          Originally posted by HawkMan
                          The mag block doesn't wiggle, it drops in from the top and the mag catch helps hold it in place. The magazines wiggle a little inside the mag block. Taking a look online there isn't too much about this issue, but I believe I need to buy a 9mm mag catch for the AR which extends the catch out a little more.
                          I'm just using the Mag Catch that cam with the lower parts kit I bought....Bullet Button enhanced of course.

                          Comment

                          • #14
                            WartHog
                            Veteran Member
                            • Jan 2012
                            • 4640

                            I built my AR9 using a basic Anderson stripped lower, a Hahn non-dedicated top-loading Colt Pattern magwell adapter, and a CMMG AR9 extended bolt catch. Have both 10 and 10/20 ASC brand mags - need to try modifying the plastic followers and the cutout where the bolt catch goes as the last round doesn't always feed and the last round bolt hold open doesn't work every time. BTW, my ASC mags seat and are held securely with very little wiggle.
                            Last edited by WartHog; 07-21-2017, 4:27 PM.
                            Originally posted by Sierra57
                            Civil War 2.0 - If it comes to pass, the America-hating Leftists will have brought it upon themselves. I value Freedom more than their sorry lives and the form of Governance they espouse, which offers no Freedom and complete servitude to the State.
                            "We have four boxes with which to defend our Freedoms: the Soap box, the Ballot box, the Jury box, and the Cartridge box" - Ed Howdershelt

                            Comment

                            • #15
                              HawkMan
                              Senior Member
                              • May 2016
                              • 549

                              I found a way to fix the issue; however, I do not consider it to be the best method.

                              I used a Flathead screwdriver to pry out the top of the hole in the magazine where the magazine catch catches.
                              On the left is the modified magazine and the right has an original magazine.
                              Magazine Picture (Imgur Link)

                              The better method which is what I would like is a magazine catch that extends out more. I'm currently using the magazine catch which came with the Palmetto State Armory Classic Lower Parts Kit.
                              Magazine Catch Picture (Imgur Link)

                              Comment

                              Working...
                              UA-8071174-1