Unconfigured Ad Widget

Collapse

Glock Sight Installation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aquajoc730
    Junior Member
    • May 2015
    • 94

    Glock Sight Installation

    Hi fellow CGers. Can anyone recommend a good gunsmith in Orange County that will cheaply install Glock sights? I know it can be a DIY project, but I don't have the time, tools, or practical expertise. I'd also be interested to know what you may have paid for their service. Thanks!


    Sent from my iPhone using Tapatalk
  • #2
    vg247
    Senior Member
    • Jul 2004
    • 1071

    Originally posted by aquajoc730
    Hi fellow CGers. Can anyone recommend a good gunsmith in Orange County that will cheaply install Glock sights? I know it can be a DIY project, but I don't have the time, tools, or practical expertise. I'd also be interested to know what you may have paid for their service. Thanks!


    Sent from my iPhone using Tapatalk
    Typically anyone with Glock sight pusher tools can do it from $35-50 range

    Comment

    • #3
      AreWeFree
      Veteran Member
      • Jan 2013
      • 4558

      Check with your local gun stores, they often install sights for free if you buy from them.

      I use a leather glove, vice, brass punch, hammer, and 3/16" nut driver + blue loctite on front sight.
      Takes about 5 minutes, done it to all 5 of my glocks no problems.


      Comment

      • #4
        Gungirl911
        Junior Member
        • Aug 2016
        • 35

        I have a glock sight tool. I can install front and rear sights for $5.

        Comment

        • #5
          Cokebottle
          Seņor Member
          CGN Contributor - Lifetime
          • Oct 2009
          • 32373

          I had my Shield sights installed at OC Gunsmith in Orange.
          IIRC, was near Glassell & Batavia, little business park.
          - Rich

          Originally posted by dantodd
          A just government will not be overthrown by force or violence because the people have no incentive to overthrow a just government. If a small minority of people attempt such an insurrection to grab power and enslave the people, the RKBA of the whole is our insurance against their success.

          Comment

          • #6
            BrokerB
            Calguns Addict
            • Sep 2010
            • 5314

            Glock will install factory night sights/mepro lights for $78... parts/labor all included. It took barely two weeks from mailing my stripped slide to them.

            If you look at the "warranty /service portion of their website theu have a form you print out and send it in with a check.

            Bam..done.
            Beans and Bullets

            Comment

            • #7
              TurboS600
              Senior Member
              • Jul 2009
              • 1121

              You can buy a universal sight pusher for under $30 and do it yourself. And you can do it again and again and again when you find sights that you like better. If you can fill your tank with gas you can change your sights by yourself. I even did my XD the same way and they are notorious for being extremely difficult to remove. The XDs are heat pressed so that they are tighter. Piece of cake. Try this:
              sigpic

              Originally posted by Helmut Shmacher Space Chimp
              Where can I get a pair..?
              Originally posted by ViPER395
              I like it colored
              Originally posted by SquidBilly
              I became mesmerized by a thick black shaft.

              Comment

              Working...
              UA-8071174-1