CZ 75 P-01 help

[1911man]

I have a P-01 that I broke the slide release/ stop. CZ sent me a new one but now it needs to be fitted, and I lost the original broken one. I am looking for a local person to help me with the fitting of the slide stop, or someone who know a person that would help me. Every other round that i shoot the slide locks back.

[guest1]

Typically slide releases don't require any fitting work. Have you removed all the broken parts out if the frame? Is your slide off or still on the frame?

[Euphoria526]

Sometimes you just need some elbow grease and just manhandle it into the little
Hole

[1911man]

It fits and it fires, but the slide locks back almost every shot. This is with the new slide release installed

[tbc]

CZ 75 P-01 help

Shoot it with your left hand only to see if the slide still locks back.

And check if the slide stop spring is still in the gun.

[allright]

Did they make a mistake and send a slide stop for a PCR?

[1911man]

They sent me both. I used the PCR slide stop for the kadet upper I am selling.

[allright]

IIRC, the PCR stop on my P01 with the P01 slide, didn't hold the slide back. So make sure you're using the correct one.

[1911man]

Thanks, I have a sp-01 and looked at it compared to my P-01 slide stop and there was a little difference. The sp-01 stop was more polished, so I polished the same area on the P-01 stop. I will see when I test fire it. The PCR stop was much more different, Longer as well as the angle of the catch.

[allright]

I have never heard of a CZ stop needing to be fit for a gun. Keep us posted.

[1911man]

I even had another guy shoot the CZ and he had the same thing happen. So I know it is not my grip. I did how ever had a Kadet on it before all this happened which never worked, because it needed to be fitted. I put. Back on the 9 mm upper and my problem started.

[1911man]

Cz

I talked with gave from CGW today. He told me it would not be the spring. We concluded that it is the ammo. The ammo worked fine before the Kadet swap. I will try factory ammo, and left handed to see the gun reacts. I took another CZ SP-01 that I own and the hook like part of the slide release was polished, so I polished the new slide release for the P-01. Hopefully that will work.