Unconfigured Ad Widget

Collapse

Pistol shot shells

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hawkgear
    Senior Member
    • Sep 2014
    • 510

    Pistol shot shells

    I had an interesting thing happen today. I normally carry my S&W 340 PD with Gold Dot, short barrel special loads and never had a problem but I fill the little guy up with CCI shot shells while mowing 7 acres on a ridding mower for snakes.
    Well, I finally used it. One shot, one kill. When I unloaded it to clean it I found one of the remaining rounds had a more than 1/8" jump. They are .38 in a .357 cylinder so it was not enough to lock up the little guy but that was only one round fired. More testing is on the list of stuff to due before I load it up again.
  • #2
    mitch1
    Member
    • Aug 2016
    • 481

    When I load .38 shot shells I taper crimp instead of roll crimp. More consistent for me because of minor case length variations. Possibly what you had there

    Comment

    • #3
      Hawkgear
      Senior Member
      • Sep 2014
      • 510

      They are actually loose in the case after being through one recoil. I can and did actually pull one plastic casing out just out of curiosity. I think I'll stick with Mongoose snake loads. Not as much shot but fully crimped.

      Comment

      • #4
        FeuerFrei
        Calguns Addict
        • Aug 2008
        • 7455

        Originally posted by Hawkgear
        I had an interesting thing happen today. I normally carry my S&W 340 PD with Gold Dot, short barrel special loads and never had a problem but I fill the little guy up with CCI shot shells while mowing 7 acres on a ridding mower for snakes.
        Well, I finally used it. One shot, one kill. When I unloaded it to clean it I found one of the remaining rounds had a more than 1/8" jump. They are .38 in a .357 cylinder so it was not enough to lock up the little guy but that was only one round fired. More testing is on the list of stuff to due before I load it up again.
        I've used CCI shot in a 38 and the plastic case never moved on me.

        Are they old rounds or?

        Snakes in the grass usually 1055 due to the 4 wheel blender action IME.

        I say dry out the head of the snake and epoxy it to the front of the mower. As an example to others. 😆

        Sent using 2 cans and a long string.

        Comment

        Working...
        UA-8071174-1