CZ scorpion Evo raddlock

[sheepdogg_81]

Does anyone know how to release mag with CA installed raddlock? Just purchased new in box and don't see a tool help

[ghostsup]

You purchased new and it doesn't have a piece with a para-cord wrist strap? Even with the supplied tool it is a PIA to do. I'm sure any small screwdriver will do the trick. Just insert upward and push toward the muzzle. The supplied tool is designed to use the trigger guard as something to kind of lock into and pry.

[Big D]

I use a pen on mine.

[Bullitt01]

Like ghost said, it should have come with a little 3d printed tool for release. Any wich way ya go,,,it is a pain!

[sheepdogg_81]

Yea the only tool it comes with is to adjust front sight.. I used a flathead screw driver but will need something more practical thanks guys

[audiophil2]

Yea the only tool it comes with is to adjust front sight.. I used a flathead screw driver but will need something more practical thanks guys

If oyu bought from me Raddlcok sent me a bunch of locks with no lanyards. I have lanyards here now.

[Jes]

Just insert upward and push toward the muzzle. The supplied tool is designed to use the trigger guard as something to kind of lock into and pry.

So that's how it's supposed to be used!?!

[Creampuff]

Yea the only tool it comes with is to adjust front sight.. I used a flathead screw driver but will need something more practical thanks guys

I didn't like the idea of the metal digging into the plastic, and I was afraid I was going to lose the tool it came with.

I use the cheap chopsticks that come free with Chinese meals. Don't use the pointy end but use the wider end that doesn't touch the food. You might need to bevel it slightly.

[ghostsup]

So that's how it's supposed to be used!?!

LOL! It took me some tinkering and time to figure that one out!

[kozumasbullitt]

I ordered some extra tools because the plastic tool is a must have. It is a pain but with some practice, it is not too bad.

[icyteddy]

It's not all that hard. Looks like everybody is making it more complicated than it really is. I just use a pen to release the magazine. It's easy. It works better than the tool that was provided.

[razorduc]

Anyone know where to get one? Mine came with a cage and I'd rather have the Raddlock.

[Big D]

If you are going to register it or go featureless, you won't need any bullet button from here on out. New law in 2017 made BB obsolete. You can just reinstall the factory magazine release.

You must not have seen the mega thread over in the California 2A section.

[icyteddy]

You must not have seen the mega thread over in the California 2A section.

Wait, so now there is classifications as "Bullet Button Assault Weapons"? So we are stuck with bullet buttons and have to registered it or go featureless?? This is lame dude.

[uhlan1]

I ordered some extra tools because the plastic tool is a must have. It is a pain but with some practice, it is not too bad.

Where did you find the extra tools, please, dare I ask.