Unconfigured Ad Widget

Collapse

50/200 yard zeroing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TheSierraDrifter
    Senior Member
    • Dec 2010
    • 730

    50/200 yard zeroing

    [/IMG]
  • #2
    glug
    Member
    • Jul 2011
    • 290

    You can see the 50 and 200 yard targets are similar but not exactly the same. 50/200 zero is an approximation, you can zero it exactly to one and it will be close at the other. Same with a 25/300 zero.

    Also keep in mind all of this is very sensitive to other variables like ammo (ballistic coefficient), barrel length (muzzle velocity), and height over bore. Those charts are probably assuming a standard 16" AR shooting 55 or 62 grain fmj.

    Comment

    • #3
      LeadFarmer74
      Veteran Member
      • May 2015
      • 3105

      50/200 refers to a 50 yard zero which will also be zeroed somewhat at 200. A 50 yard zero has a tighter group across a distance and less hold over for longer distance.
      NRA Lifer
      Originally posted by Click Boom
      I know your ban hammer is cold hammer forged and chrome lined, im not messin with it!

      Comment

      • #4
        Metal God
        Senior Member
        • Apr 2013
        • 1839

        It's more complex then just wanting a 50/200 or 25/300 yard zero . Some things to consider . First is it's not exact but close . Second is it has a lot to do with the cartridge and the height of your optic off the center bore line .

        Most AR optics sit pretty high of the bore . "F" marked front sight base is about 2.5" above the center bore line . So a 55gr bullet with a BC of .245 at a velocity of 3100fps fired from a rifle with the optic 2.5" above the bore will in fact have a 200yd zero if sighted in at 50yds . On the other hand if you tried that with lets say a scoped rifle with the optic only 1.5" off the bore and everything else the same you would have a 50yd zero and a 150yd zero .

        The reason for this is the bullet starts out below the optic/line of sight . It then travels up to meet that line at what ever distance you choose . In this case that's 50yds . How ever the bullet does not stop rising at 50yds . That 50yd zero will actually hit about 1" high at 100yds and peak out at 1.5" high at 125yds where it then starts to drop back down to earth impacting the 200yard target right where your sight are aimed give or take a 1/2 inch .
        Last edited by Metal God; 12-05-2016, 3:27 PM.
        Tolerate
        allow the existence, occurrence, or practice of (something that one does not necessarily like or agree with) without interference.

        Anyone else find it sad that those who preach tolerance CAN'T allow the existence, occurrence, or practice of (something that they do not necessarily like or agree with) without interference.

        I write almost everything in a jovial manner regardless of content . If that's not how you took it please try again

        Comment

        • #5
          TheSierraDrifter
          Senior Member
          • Dec 2010
          • 730

          Thanks to everyone for their responses. So it sounds like if I want a true 200 yard zero, I need to zero-in at that distance (and the same for all other distances). Given my limitations, I will probably go for a 50 yard zero and verify it at longer distance when possible. Better yet, I should probably buy a good range finder and a small steel target that I can hear the hits on rather than walk out that far to check. Thanks again!

          Comment

          • #6
            Metal God
            Senior Member
            • Apr 2013
            • 1839

            First you need to consider you are using a red dot they are not designed for pin point accuracy . Second the 25/300 or 50/200 sighting method is designed to give you a point blank zero . Meaning if you have the 50/200 zero you just put the dot on target from 0 to 200yds and you hit what your aiming for . At some distances with in that 200yds you'll be 1" low and others 1" high but all shots should be with in that 2" swing . The 50/200yd zero in my preferred red dot zero .

            What red dot do you have and what mount are you using ?
            Last edited by Metal God; 12-06-2016, 10:12 AM.
            Tolerate
            allow the existence, occurrence, or practice of (something that one does not necessarily like or agree with) without interference.

            Anyone else find it sad that those who preach tolerance CAN'T allow the existence, occurrence, or practice of (something that they do not necessarily like or agree with) without interference.

            I write almost everything in a jovial manner regardless of content . If that's not how you took it please try again

            Comment

            • #7
              TheSierraDrifter
              Senior Member
              • Dec 2010
              • 730

              I have an EOTech XPS2-1 (no outer ring, just the 1 MOA dot). No additional riser, just the mount that comes integral with the optic.
              Last edited by TheSierraDrifter; 12-06-2016, 10:29 AM.

              Comment

              • #8
                rcpilot_971
                Member
                • Dec 2009
                • 304

                Originally posted by Metal God
                First you need to consider you are using a red dot they are not designed for pin point accuracy . Second the 25/300 or 50/200 sighting method is designed to give you a point blank zero . Meaning if you have the 50/200 zero you just put the dot on target from 0 to 200yds and you hit what your aiming for . At some distances with in that 200yds you'll be 1" low and others 1" high but all shots should be with in that 2" swing . The 50/200yd zero in my preferred red dot zero .

                What red dot do you have and what mount are you using ?
                +1.

                Comment

                • #9
                  AceGirlsHusband
                  Veteran Member
                  • Jan 2013
                  • 2651

                  It simply means the theoretical impact point at 50 is the same at 200 given perfect conditions.

                  Comment

                  • #10
                    mif_slim
                    I need a LIFE!!
                    • Apr 2008
                    • 10089

                    Also to add to Metal god, your fps will matter as well. Most 14.5-16" barrels wont be getting 3100fps. More like 2800-2900fps. That matters when it gets out to ranges like say, 500 yards. One will be around ~60" drop vs the other at ~70" from the 100fps differencd
                    Last edited by mif_slim; 12-07-2016, 8:59 AM. Reason: Spelling
                    Originally posted by Gottmituns
                    It's not protecting the rights of the 1%, it's IMPOSING new laws because of the 1%.

                    Comment

                    • #11
                      dwalker
                      Veteran Member
                      • Jul 2014
                      • 2714

                      Most ed dots at 200 yards are somewhat challenging because the size of the fot is often larger than the target, although some like the Burris AR-1X and the Luepold and Vortex Spitfire etc red dots make 200yards and further with a red dot more practical.
                      Fear is the spare change that will keep you broke

                      Call him run-like-hell-when-shtf-guy or dial-911-guy but NEVER call an unarmed man "Security".

                      Comment

                      • #12
                        rcpilot_971
                        Member
                        • Dec 2009
                        • 304

                        So if you zero at 25 yards will you be on at 100 ?

                        Comment

                        • #13
                          froglives
                          CGN/CGSSA Contributor - Lifetime
                          CGN Contributor - Lifetime
                          • Mar 2012
                          • 49

                          I am trying to remember just when it was I could see past 100 yards without a damn scope.

                          Metal God that is the most easy to understand explanation I have read on the Zero thing. That dang zero thing my daughter seems to think I should be able to help her with when all her shots touch each other, while mine are lucky to find the damn target.
                          "The Only Easy Day Was Yesterday" (Tony Zimos, R.I.P. Frog 2016)

                          Comment

                          • #14
                            kcheung2
                            Veteran Member
                            • Aug 2012
                            • 4387

                            Originally posted by rcpilot_971
                            So if you zero at 25 yards will you be on at 100 ?
                            No, you'll be about 5" high at 100 yds.
                            ---------------------
                            "There is no "best." If there was, everyone here would own that one, and no other." - DSB

                            Comment

                            • #15
                              Metal God
                              Senior Member
                              • Apr 2013
                              • 1839

                              No you will be really high , like 5 to 8" or so . Your eye looks straight to the target in a perfectly straight line . The second the bullet leave the barrel it starts falling . So if you scope is 2.5" above the bore and you bore is parallel to the scope . the bullet will never cross the line of sight . The barrel must be pointing upwards in relation to your line of sight in order for the two to meet at any give point

                              The closer the first zero is to the bore the steeper the trajectory ( barrel pointing up ) needs to be resulting in the bullet having a higher ark above the line of sight . I hope I explained that well enough to understand .

                              See this video to see how the bullet crosses the line of sight twice , once close then again way down range . That's how you get the two zero's 50/200 . In theory you could have a 1yd/1000yd zero


                              Understanding MOA
                              Last edited by Metal God; 12-07-2016, 9:43 PM.
                              Tolerate
                              allow the existence, occurrence, or practice of (something that one does not necessarily like or agree with) without interference.

                              Anyone else find it sad that those who preach tolerance CAN'T allow the existence, occurrence, or practice of (something that they do not necessarily like or agree with) without interference.

                              I write almost everything in a jovial manner regardless of content . If that's not how you took it please try again

                              Comment

                              Working...
                              UA-8071174-1