Is it necessary to Head Space your AR if it is a Completed Upper ?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
AR Head Space ?
Collapse
X
-
AR Head Space ?
Tags: None -
In theory, yes it's a good idea. But in practice, you're never actually going to find one that fails a headspace check, unless you bought your bolt and barrel behind a dumpster from a sketchy-looking guy with a lazy eye, who ran away laughing after you traded him $4 for the parts.Comment
-
lmao..In theory, yes it's a good idea. But in practice, you're never actually going to find one that fails a headspace check, unless you bought your bolt and barrel behind a dumpster from a sketchy-looking guy with a lazy eye, who ran away laughing after you traded him $4 for the parts.
Your description reminds me of Rohg Arms (old vendor here who got ran off who sold sketchy chinese parts that exploded on many people)"If a law is unjust, a man is not only right to disobey it, he is obligated to do so." - Thomas JeffersonComment
-
Depends on who completed it. Lots of suppliers freely admit they just grab a bolt carrier off the shelf and shove it in without headspacing it. Suppliers like Bushmaster that headspace every one are rare.Comment
-
LOL. True.In theory, yes it's a good idea. But in practice, you're never actually going to find one that fails a headspace check, unless you bought your bolt and barrel behind a dumpster from a sketchy-looking guy with a lazy eye, who ran away laughing after you traded him $4 for the parts.
Trust but verify
Comment
-
Originally posted by Sierra57Civil War 2.0 - If it comes to pass, the America-hating Leftists will have brought it upon themselves. I value Freedom more than their sorry lives and the form of Governance they espouse, which offers no Freedom and complete servitude to the State."We have four boxes with which to defend our Freedoms: the Soap box, the Ballot box, the Jury box, and the Cartridge box" - Ed Howdershelt
Comment
-
To feel okay about it, just run a go and no-go gauge set. You should be fine.Comment
-
REALLY !!??In theory, yes it's a good idea. But in practice, you're never actually going to find one that fails a headspace check, unless you bought your bolt and barrel behind a dumpster from a sketchy-looking guy with a lazy eye, who ran away laughing after you traded him $4 for the parts.
I bought top quality parts, barrel, BCG, upper, and did a head scpace check. Bolt would not close all the way. Had to swap parts with another rifle to get both rifles working correctly.
ALWAYS CHECK HEAD SPACE, no matter where you get your stuff.Never shoot a large caliber man with a small caliber bullet.Comment
-
Using the proper headspace gauges and procedures your bolt shouldn't be closing all the way. You insert the go gauge and the hammer falls it's a go. Insert the no-go gauge and the hammer falls and it's no-go. It could also mean the fire control parts or the bolt carrier are out of spec or damaged.
If the parts are quality built to spec and not built in a sweat shop at night in China that doubles as a toy factory in the day you should be OK. There is no fitting required on a AR rifle unlike an AK. As long as the proper specs are used when made it's either a go or no-go. If a newly built AR rifle fails headspacing either the it's out of spec parts or improperly put together.
This is from an old thread:
Here's how it should be.
New upper = new bolt ok
Used upper = new bolt ok
New upper = used bolt not recommendedComment
Calguns.net Statistics
Collapse
Topics: 1,870,847
Posts: 25,176,621
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 35950 users online. 110 members and 35840 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.


Comment