I've had multiple guns come into the shop with stuck bore snakes. It happens normally for one of two reasons. Using a bore snake that is the wrong caliber or pulling it part way down a barrel then trying to reverse it resulting in the brush locking in the barrel.
Depending on the extent of the jam and how much other stuff is now broken off in the barrel this is how we remove them.
1. Pull using a leverage bar. You can make a new cord to pull by attaching a anchor screw to paracord and screwing it into the end of the broken snake.
2. The hydraulic method. Fill the barrel behind the snake with grease. Use a wood down that fits snug to the barrel and use that to tap the grease. It will drive the grease around the brush and produce hydraulic pressure to force it out.
3. The pick apart method. Attach a drill bit or any thing that will snag the cloth of the snake and insert it into the stuck snake. Start breaking bits of the snake off and pull it out piece by piece.
4. Worst case drill it. I would take it to someone with experience to try this method.
Pounding on it will just make it worse.
I've never tried burning it out. I'm not sure that would work with the amount of oil and grease already on the snake by the time they bring it to me.
Good luck. Be patient and go slow.
Depending on the extent of the jam and how much other stuff is now broken off in the barrel this is how we remove them.
1. Pull using a leverage bar. You can make a new cord to pull by attaching a anchor screw to paracord and screwing it into the end of the broken snake.
2. The hydraulic method. Fill the barrel behind the snake with grease. Use a wood down that fits snug to the barrel and use that to tap the grease. It will drive the grease around the brush and produce hydraulic pressure to force it out.
3. The pick apart method. Attach a drill bit or any thing that will snag the cloth of the snake and insert it into the stuck snake. Start breaking bits of the snake off and pull it out piece by piece.
4. Worst case drill it. I would take it to someone with experience to try this method.
Pounding on it will just make it worse.
I've never tried burning it out. I'm not sure that would work with the amount of oil and grease already on the snake by the time they bring it to me.
Good luck. Be patient and go slow.







. 
Comment