Ok so we all know the options for fixing your mag whether it be a mag lock or new special type of top loading magazine thing.
But what happens if you are shooting and your gun jams. Say you had a double feed and the rounds get really jammed in there to the point that they are strongly stuck in place causing the bolt to stay halfway into the buffer tube.
Ok so the way I see it is you have a few options since you can't remove the mag to clear the jam and to avoid chambering a new round once you do clear the jam. The reason you can't is because you can't seperate he upper and the lower when the bolt is stuck half way into the buffer tube:
1. Hold the bolt back and try to stick something (hopefully not your finger) into the ejection port to clear the jam while keeping the muzzle pointed in a safe direction (which is extremely dangerous since your dealing with live loads. And will result in rechambering a new round once you clear the jam and getting the bolt to go forward.)
2. Remove the barrel, which hopefully u have the barrel nut tool at the range with you otherwise your driving home with a loaded rifle in your vehicle. Or trying to remove the barrel with live rounds in the upper while keeping the muzzle pointed in a safe direction.
3. Or i don't know
What do you think?
What would you do if for some reason your bcg is stuck in the rearward position and you can't open your upper and lower and have a full mag that you can't remove?
But what happens if you are shooting and your gun jams. Say you had a double feed and the rounds get really jammed in there to the point that they are strongly stuck in place causing the bolt to stay halfway into the buffer tube.
Ok so the way I see it is you have a few options since you can't remove the mag to clear the jam and to avoid chambering a new round once you do clear the jam. The reason you can't is because you can't seperate he upper and the lower when the bolt is stuck half way into the buffer tube:
1. Hold the bolt back and try to stick something (hopefully not your finger) into the ejection port to clear the jam while keeping the muzzle pointed in a safe direction (which is extremely dangerous since your dealing with live loads. And will result in rechambering a new round once you clear the jam and getting the bolt to go forward.)
2. Remove the barrel, which hopefully u have the barrel nut tool at the range with you otherwise your driving home with a loaded rifle in your vehicle. Or trying to remove the barrel with live rounds in the upper while keeping the muzzle pointed in a safe direction.
3. Or i don't know
What do you think?
What would you do if for some reason your bcg is stuck in the rearward position and you can't open your upper and lower and have a full mag that you can't remove?


Comment