Ever dealt with that stuff? I'm fairly confident you could store them in the ocean after a coating.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Long Term Storage
Collapse
X
-
FWIW (and I'm no expert), I bought a Colt Mustang back in 1992. I placed in it a nightstand safe that found its way in a desk drawer underneath stacks of papers. It sat there until 2012 - never gave the gun a second thought (bought just before the Rodney King riots).
Took the gun out of the safe and looked as new the day I bought it (as it should - I never shot it). Didn't place any gel or 'rust inhibitor' materials in the safe. It is the type of safe that a plastic screwdriver can pry open.
What I'm getting at is don't overthink storage (for 3 years). Being a bit (but not much) smarter now than I was 24 years ago, *I* would put a liberal amount of oil on all surfaces and place it in a gun rug w/ a couple gel packs inside your safe. *I* would advise lifting the safe off the floor a couple inches (if not already bolted to the structure) to avoid moisture..
Facts are to liberals as kryptonite is to Superman.
...
Feed a man a fish, he eats for a day (Democrat).
Teach a man to fish, he eats for a lifetime (Republican).Comment
-
i would diassemble what i can , man. then lightly clean and then oil all parts. Wrap in plastic and place in safe the way you described, probably ok. make sure safe is in an area that has good air flow. not some stuffy basement with no dry air flow.--------------------------------------------------
NEVER lend anyone any money, unless you are ok gifting them that same amount.
Originally Posted by Citadelgrad87 View Post
It's one thing to question everything . . . It's entirely another thing to reject simple, rational explanations in favor of ever more fantastic and far reaching explanations because you've decided the government cannot be trusted.
Comment
-
Hope it works out OP.
Comment
-
Cosmoline, T9 or is it P9? Whatever they use the replace cosmoline now... a couple recent threads show wd-40 specialist and hornady one shot to be great.
Maybe you could vacuum seal them after coating with a rust inhibitor in a co2/argon/nitrogen or whatever gas purge.
I had a rifle in a soft padded case with regular old wd-40 on it for 5 years. In a wet/damp basement. Only rust on it was a fingerprint (my stupidity).
I think level A packing (indefinite, all weather storage/transport) is cosmoline or the like, vacuum sealed, put in a cardboard box (with some paper buffer), and then stacked up in a plywood crate. And this is supposed to pretty much last indefinitely, excluding excessive rain.
You'll be fine.Comment
-
Buy a roll of VPI paper, thoroughly wrap each gun in the paper, and place them in plastic bags. Possible the vacuum sealer type. Then into the safe. The VPI paper has a corrosion inhibitor in it, which will stop all rust.
I have a roll, which I have slowly used over the years. I put pieces in with all my ammo cans, and wrap handguns in it too...Works like a champ..
Most firearms manufacturers use it in their gun boxes to prevent rust...Poke'm with a stick!
Originally posted by fiddletownWhat you believe and what is true in real life in the real world aren't necessarily the same thing. And what you believe doesn't change what is true in real life in the real world.Comment
-
Those are expensive as hell and only good for one use. If OP has 20+ guns (which it sounds like) that could easily cost him over a grand.Originally posted by AreWeFreeI'd probably clean and very lightly lube my guns, then store in ZCorr bags.Unless we keep the barbarian virtues, gaining the civilized ones will be of little avail. Oversentimentality, oversoftness, washiness, and mushiness are the great dangers of this age and of this people." Teddy Roosevelt
I Hate California.Comment
-
I saw these on Brownells, rated for 5-20 years storage, giving you some leeway in case some kawawii Japanese chick managed to retain you longer than expected.
Shop gunsmithing tools (605) at Brownells, including bench blocks, hammer & punch sets, screwdrivers, and tool kits for firearm maintenance and repairs.
P.S.: Congratulations on the posting. In case the Chinese invades Japan, kick some butt!
Comment
-
So thats the paper I always find my Saiga and VEPR mags wrapped in. Ive always wonderedBuy a roll of VPI paper, thoroughly wrap each gun in the paper, and place them in plastic bags. Possible the vacuum sealer type. Then into the safe. The VPI paper has a corrosion inhibitor in it, which will stop all rust.
I have a roll, which I have slowly used over the years. I put pieces in with all my ammo cans, and wrap handguns in it too...Works like a champ..
Most firearms manufacturers use it in their gun boxes to prevent rust...Unless we keep the barbarian virtues, gaining the civilized ones will be of little avail. Oversentimentality, oversoftness, washiness, and mushiness are the great dangers of this age and of this people." Teddy Roosevelt
I Hate California.Comment
-
Poke'm with a stick!
Originally posted by fiddletownWhat you believe and what is true in real life in the real world aren't necessarily the same thing. And what you believe doesn't change what is true in real life in the real world.Comment
Calguns.net Statistics
Collapse
Topics: 1,867,686
Posts: 25,161,284
Members: 357,365
Active Members: 5,116
Welcome to our newest member, Kahiau18.
What's Going On
Collapse
There are currently 17266 users online. 37 members and 17229 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.

Comment