What lower receiver fits Glock 23 upper

[mexicangunlover]

Picked up this upper on eBay for $128 which was a great deal I think so now need the lower and which one fits this upper.

[eviioiive]

I'd try a glock 23

[berg]

By "lower receiver" I assume you mean "frame"? I think there is an aftermarket aluminum Glock frame on the market. Try here http://www.ccfraceframes.com/options.php

[Tripper]

What lower receiver fits Glock 23 upper

The 23 upper will fit and work on 19/23/32 frames, just use glock 23 mags, the 19 frame will probably eject fine, you may want to change the ejector if you use a 32 frame

[dc2allday]

Build one from a flat

[50BMGBOB]

Nice find. I want to find one like that to put some Homeboy Nite Sights on for my 23.

[5ZS]

See if your (or a) FFL will receive a lower frame: http://www.glockmeister.com/GLOCK-Co...nfo/LOWERCOMP/

Since it's a .40SW, you can have a 9mm and .357SIG barrel caliber conversion as well.

[AreWeFree]

I don't think you got a very good deal, sorry.

Unless you already have a compact Glock frame, or can find a frame through PPT, you'll be in for about what a brand new Glock will cost but will have spent more time/effort. Even if you find a frame you've only saved a few dollars, might as well have just bought a used Glock.

[Spyder]

Berg! Are those available yet?? Can't tell by looking at the website on my phone.

[mexicangunlover]

I don't think you got a very good deal, sorry.

Unless you already have a compact Glock frame, or can find a frame through PPT, you'll be in for about what a brand new Glock will cost but will have spent more time/effort. Even if you find a frame you've only saved a few dollars, might as well have just bought a used Glock.

I looked around and the upper is sold for $300 to 350 and I just found a used frame G23 for $90 bucks on GB so I think it's a hell of a deal.

[AreWeFree]

I looked around and the upper is sold for $300 to 350 and I just found a used frame G23 for $90 bucks on GB so I think it's a hell of a deal.

The few times I've seen complete frames for sale here they were around $250 - $300.

I hope you get by for a lot less, and good luck on the hunt for a frame.

I'd suggest talking with your LGS first before buying anything except a FTF PPT.

[Tere_Hanges]

I did the exact opposite. I have a 3rd generation 23. Went on gunbroker and got a complete 2nd gen 19 upper assembly with night sights. Now I have a 19 and a 23. Didnt have to change the ejector either. The .40 ejector works great with the 19 slide. I could have just got a 9mm conversion barrel but they look stupid and arent cheap.

[mexicangunlover]

The few times I've seen complete frames for sale here they were around $250 - $300.

I hope you get by for a lot less, and good luck on the hunt for a frame.

I'd suggest talking with your LGS first before buying anything except a FTF PPT.

I found a used frame for $90 on GB and I know my dealer real well....

[Librarian]

The few times I've seen complete frames for sale here they were around $250 - $300.

I hope you get by for a lot less, and good luck on the hunt for a frame.

I'd suggest talking with your LGS first before buying anything except a FTF PPT.

I found a used frame for $90 on GB and I know my dealer real well....

Do note that only complete guns are on the Roster - there are no 'just frames'. That's OK for PPT, since the Roster generally doesn't apply, and one would have to bring that slide assembly in to do the safety demo.

[berg]

Berg! Are those available yet?? Can't tell by looking at the website on my phone.

Oops I guess they aren't really available actually. Here is a message on their home page:

Unfortunately CCF RaceFrames LLC has ceased operations.
A small quantity of frames remain available - contact us at 804-622-4277

Small parts support will be available at www.ccfa.com

This seller on gunbroker has lots of frames and slides though http://www.gunbroker.com/All/BI.aspx...Sellers=904235