Tweet
So I decided to take it out for cleaning (I rarely ever touch the thing cuz its my HD gun and just sits around most of the time). I try to clear the magazine for a cleaning, and the pump wouldn't go back more than 1/3 of the way. So I pulled off the barrel and went to remove the trigger assembly to see what was wrong and the trigger assembly is also stuck and refusing to release. The safety button as well only goes from safe to halfway released, it can't full release. I'm not entirely sure what is going on, but seeing as how ammo is still stuck in the magazine (not the chamber) I can't ship it out to mossberg for help.
-
Last edited by Soginator; 03-10-2016, 11:42 AM.WTS HK USP45c http://www.calguns.net/calgunforum/s....php?t=1304283 -
Photo? -
Forgot to add those, uploaded now.WTS HK USP45c http://www.calguns.net/calgunforum/s....php?t=1304283Comment
-
On my 500 I can unscrew the mag tube from the receiver, worth a try.Comment
-
Tried, doesn't seem to be the case with this version. Or I may be retarded. 50/50 chance. Maybe this is the excuse I've been looking for to get the Kel-Tec KSG or UTAS-15 I've been eyeing lol. I would take it to a smith, but it just doesn't seem worth it to have 200+ in charges for a $300 new shotgun.WTS HK USP45c http://www.calguns.net/calgunforum/s....php?t=1304283Comment
-
Have you tried holding the fore piece in your right hand and slamming the buttstock on the ground .
Sometimes the inertia will open the action on pumps and some self loaders .Comment
-
If you are wondering if you can get a LTC in Riverside County: THE ANSWER IS YES!
Join the discussion at:http://www.calguns.net/calgunforum/s...d.php?t=352777Comment
-
Just put the pump in the full forward position. Now the spoon can be pressed up just like if you were loading the shotgun. From there all you need to do is press on the retaining tabs and the shells will pop out of the magazine the same way they went in. Once unloaded you can continue with trying to diagnose the problem. Or just send it to Mossberg for service. Either way, that method should let you at least get the shells out."Suck on my machine gun" (Ted Nugent)
Originally posted by Fishslayer"9mm is for killing Europeans. For truly dangerous people you need a .45."
Originally posted by fighterpilot562I showed up naked to ur house with cake. But you weren't home. YOur wife maced me. And I was arrested
Comment
-
I'll give this a go when I get home. Although I'm still leaning towards this being an excuse to get a space shotgun
WTS HK USP45c http://www.calguns.net/calgunforum/s....php?t=1304283Comment
-
I have both a Mossy 590A1 and a KSG. I bought the KSG to replace the 590 as my HD long gun as it is shorter, which makes clearing corners better for me, and it holds more ammo more ergonomically.
However, reloading the KSG under fire or in a stress situation is very very difficult. To date I have not heard of anyone figuring out a good way to do a tactical load or reload on a KSG/UTAS-15 type shotty.
I have done a lot of tactical training with the shotty and just cant figure out how to do a quick reload on this thing while maintaining readiness to fire off the round in the chamber.
I know some of you will push back on not needing to reload a beast that carries 14+ rounds. However, before spouting off, talk with some folks in the know about actual gun battles with shotguns and you will hear how quick you go through ammo.
The KSG kicks more than the 590. At a minimum I would also suggest the following mods; 1. the Pachmayr Decelerator Slip On Recoil Pad and 2. Hi-Tech's KSG "Extended" Tube Tactical Selector Switch (Gen 2).
Anyways...maybe some of this info will be of use for you.All things being equal...Comment
-
-
Check to make sure your shell elevator is correctly seated.Bounce a ball in Football that's a fumble. Baseball, no bouncing at all. Bounce a ball in Hockey, well that's a mandatory drug test right there...Comment
There are currently 13826 users online. 118 members and 13708 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment