Unconfigured Ad Widget

Collapse

Rust...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SureShot241
    Senior Member
    • Jan 2011
    • 870

    Rust...

    So recently, I opened up my safe, and found that several of my firearms had rusted. Most of it was spotted rust, however, my HD shotgun got the worst of it.

    I used some elbow grease, and removed most of it. Unfortunately for my HD shotgun, I removed most of the bluing with it. Its being sent out to cerakote shortly.

    After doing some research, I found that white vinegar works great at removing rust. After never wanting to remove rust again, I went back over every spot that had rust with vinegar, and got a bit more off (also noticed some new rusted parts).

    Some things I noticed:
    -The cheaper parts rusted faster
    -The quality parts didn't rust on most things except in mild areas
    -Areas that had a lot of contact with hands had way more rust (bolts, triggers, etc.)

    After removing all visible rust, I oiled everything (anything metal received a nice coating), and put them away. I also purchased a dehumidifier for my safe.

    From anyone's experience, is there anything else I should do?
    I plan on adding oil to my firearms every month or so now. Removing rust is no fun.
    The very existence of flamethrowers proves that some time, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done."
    George Carlin, US comedian and actor (1937 - 2008)


    "High Speed, Low Drag..GoodToGo" RTT-CQB Man
  • #2
    L84CABO
    Calguns Addict
    • Mar 2009
    • 8719

    Buy a Golden Rod sized appropriately for your safe. Get a humidity meter. And get a big thing of desiccant. All of this can be had off Amazon for $50 give or take.

    Wipe everything down with a light coat of oil or silicone cloth. I would check your safe daily until you get things under control. Then a weekly check and wipedown.

    The meter should help you understand what's going on in there.
    "Kestryll I wanna lick your doughnut."

    Fighter Pilot

    Comment

    • #3
      glock_this
      Calguns Addict
      • Dec 2005
      • 8225

      You can also get silicon impregnated socks for your rifles.
      10 +1 in the chamber

      Comment

      • #4
        Californio
        CGN/CGSSA Contributor - Lifetime
        CGN Contributor - Lifetime
        • Dec 2006
        • 4169

        I have two of these in my safe, one on the bottom and another on the top, replaced yearly, and no problems on the coast.

        "The California matrix of gun control laws is among the harshest in the nation and are filled with criminal law traps for people of common intelligence who desire to obey the law." - U.S. District Judge Roger T. Benitez

        Comment

        • #5
          WartHog
          Veteran Member
          • Jan 2012
          • 4639

          As a spray-on rust preventative, you should consider CorrosionX. I've been using it for years on my Saltwater fishing reels and equipment and it has done a superb job at preventing corrosion from starting. I have also been using it on guns with excellent results. They do make a product especially for guns but I've just been using their standard spray product.

          Originally posted by Sierra57
          Civil War 2.0 - If it comes to pass, the America-hating Leftists will have brought it upon themselves. I value Freedom more than their sorry lives and the form of Governance they espouse, which offers no Freedom and complete servitude to the State.
          "We have four boxes with which to defend our Freedoms: the Soap box, the Ballot box, the Jury box, and the Cartridge box" - Ed Howdershelt

          Comment

          • #6
            Twystd1
            Superfluous
            CGN Contributor - Lifetime
            • Oct 2009
            • 2692

            Originally posted by Californio
            I have two of these in my safe, one on the bottom and another on the top, replaced yearly, and no problems on the coast.

            http://www.theruststore.com/Bull-Fro...ld-P25C12.aspx
            SPOT ON. !

            I live near the beach. Hence higher humidity with a bit of salinity thrown in for good measure.

            I use the same thing Californio does. I put 2 of them in each safe.
            I also mark the date on each one with a felt pen so I know when I need to change them out.

            I also keep each firearm slightly wet with oil. I use Pennzoil 5/20 synthetic for most things firearms related.

            I also use silicon socks on all of my blued guns.

            LASTLY. Once the guns are oiled. I NEVER touch the metal with my fingers.
            I will wear gloves or only touch the wood, plastic, or rubber grips with my skin.

            Thats what ya need to do if you live near the beach or have high humidity or have highly acidic skin. I have all 3.

            A golden rod rod doesn't do much of anything if you live near high humidity and salt air.

            Blued bolt handles are the WORST.... ! ! !

            I now have very little oxidation issues in any of my safes.

            Thats my experience. Yours may be different.

            -T

            Comment

            • #7
              -hanko
              CGN/CGSSA Contributor
              CGN Contributor
              • Jul 2002
              • 14174

              Originally posted by SureShot241
              So recently, I opened up my safe, and found that several of my firearms had rusted. Most of it was spotted rust, however, my HD shotgun got the worst of it.
              Curious as to shotgun brand...Remington, by chance??
              True wealth is time. Time to enjoy life.

              Life's journey is not to arrive safely in a well preserved body, but rather to slide in sideways, totally worn out, shouting "holy schit...what a ride"!!

              Heaven goes by favor. If it went by merit, you would stay out and your dog would go in. Mark Twain

              A man's soul can be judged by the way he treats his dog. Charles Doran

              Comment

              • #8
                Napalm Bulldog
                Veteran Member
                • Jun 2009
                • 4266

                I use corrosion x over the outside of my rifles and never had a rust issue since.

                Comment

                • #9
                  SureShot241
                  Senior Member
                  • Jan 2011
                  • 870

                  Originally posted by -hanko
                  Curious as to shotgun brand...Remington, by chance??
                  It's a Mossberg 500
                  The very existence of flamethrowers proves that some time, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done."
                  George Carlin, US comedian and actor (1937 - 2008)


                  "High Speed, Low Drag..GoodToGo" RTT-CQB Man

                  Comment

                  • #10
                    Jimi Jah
                    I need a LIFE!!
                    • Jan 2014
                    • 18954

                    never sleeps.

                    Comment

                    • #11
                      blackrat
                      Senior Member
                      • Mar 2011
                      • 1103

                      Originally posted by glock_this
                      You can also get silicon impregnated socks for your rifles.
                      I have a golden rod in my safe but I went ahead and bought a bunch of these for my rifles anyway. Amazone carries the Allen versions and they are pretty affordable and have a tag to help ID them. Not only does it hopefully protect against rust but it also lets me pack them tighter since it's a layer of protection angainst dinging or gouging wood trying to get something from the back out.

                      Comment

                      • #12
                        maylebox
                        Senior Member
                        • Jun 2013
                        • 1155

                        Originally posted by Jimi Jah
                        never sleeps.
                        ISWYDT
                        "Sell crazy someplace else, we're all stocked up here"

                        Comment

                        • #13
                          jonzer77
                          • Jul 2010
                          • 8525

                          Originally posted by -hanko
                          Curious as to shotgun brand...Remington, by chance??

                          Sounds like you have a Remington 870 express lol.


                          Sent from my iPhone using Tapatalk
                          Originally posted by barrage
                          That's because Excelsior threads are like toilet bowls. They're made for crapping in and occasionally pissing on the side of.

                          Comment

                          • #14
                            osis32
                            Calguns Addict
                            • Jul 2009
                            • 5912

                            I use gun socks from amazon and eezox. hasnt done me wrong yet and I live 10 minutes from ocean beach. everything rusts like crazy.
                            Just a libertarian guy in a Leftist Authoritarian state.

                            Comment

                            Working...
                            UA-8071174-1