ESCORT semi-auto/MAGPUL 870 SGA stock (PIC)

[Fairlane2012]

Just sharing cuz' really haven't ever seen... but I worked a MAGPUL SGA stock for Remington 870 onto my ESCORT MP Tactical semi-auto... word!

[Stewdabaker23]

did you have to use a dremel?

[Fairlane2012]

no dremel work

[Google it Research]

Good job! This will allow others to upgrade their weapons.

[Zartan]

Not a fan of the stock, but looks good OP

[calif 15-22]

Not a fan of the stock, but looks good OP

I used to think that as well then bolted the SGA to my 870 Tactical. If shoulders really well and the pistol like contour of the handle works well for me. The look take some getting used to but the function is spot on!

Mine looks like this now:

[tmh1]

I put one on my dumb-*** Hawk after trying one on my Mossy 500. These are fabulous stocks, and come highly recommended, at least from me. I love the simple adjustment of LOP, and they are ROCK SOLID and comfortable.

$100 SGA stock on a $200 shotgun But I have NO regrets,


Thanks OP for letting folks know that they can put this great stock on other guns!

[Omil]

I put one on my dumb-*** Hawk after trying one on my Mossy 500. These are fabulous stocks, and come highly recommended, at least from me. I love the simple adjustment of LOP, and they are ROCK SOLID and comfortable.

$100 SGA stock on a $200 shotgun But I have NO regrets,


Thanks OP for letting folks know that they can put this great stock on other guns!

Looks very comfy, will done. If you don't mind, how's easy to adjust LOP ?
Thanks.

[jay_cue]

Looks very comfy, will done. If you don't mind, how's easy to adjust LOP ?
Thanks.

it's just a matter of adding/taking off the spacers where the butt stock pad is located.

[SNCaliber]

OP, did you have to modify anything at all for it to work, or did it just slide right on?

[tmh1]

it's just a matter of adding/taking off the spacers where the butt stock pad is located.

Yup, that's on the money. Only 1 screw to do this. I am 6'4" with fairly long arms, so I normally like a pretty long LOP. Magpul gives you 4 spacers, and I am only using 2!

They diagram it better than I could:


BTW the 870 SGA fits the Hawk 982 without any modifications.

[Tenacious-B]

That looks right at home on your Escort. Nice job!

[Fairlane2012]

OP, did you have to modify anything at all for it to work, or did it just slide right on?

Only adjustment to stock was slightly mill/drill out the mounting hole through grip to accept/accommodate the larger M8x1.25 mounting bolt to the ESCORT receiver. Worked up a new washer for the larger mounting bolt too to fit in the stock...

[Omil]

it's just a matter of adding/taking off the spacers where the butt stock pad is located.

Thanks, same as those Mossy Youth' 510.