Unconfigured Ad Widget

Collapse

Mossie Mav forend conversion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • myclejay
    Junior Member
    • Jul 2010
    • 2

    Mossie Mav forend conversion

    Picked up a cheap brand new Maverick off of GB and wanted to dress it up a bit by doing the usual, pistol grip, sling mounts, new forend, etc. For the forend upgrade, my goal was to install the Mossberg 95213 Flex Tactical Railed Forend to give it a more rugged look with the capability of adding a tac light,etc. In order to do the forend upgrade I realized that I needed a 500 action tube assembly because the OEM Mav forend is one piece. So I decided to order a new ProMag 7 5/8" tube assembly.

    After installing the action tube assembly and forend, the gun did not cycle at all as the action tube seemed to be stuck somewhere. Initially I thought this was because I needed to add a little lube but this did not help. I immediately removed the barrel and the forend cycled just fine realizing that it was the wider base of the barrel that was the culprit. After taking a closer look at the action tube, the area of the tube where the rails meet up with the tube itself had wear marks where I attempted to cycle the forend. Then, I thought maybe that it was the forend itself so I installed a different model (Hogue Tamer model) but to no avail.

    I took the gun into a local gun shop to get an "expert opinion" of what may be the problem. I told him that it was a ProMag version and he stated that he never buys anything ProMag because it "sucks". I don't think it matters as all Mossie tube assemblies are supposed to work. Maybe i'm wrong. Other than the brand, the guy didn't know what the issue could be and the only solution he could think of was to take a Dremel to the rub points. I pointed out that this would compromise the integrity of the tube because there isn't enough depth to work with.

    As an afterthought I should have just bought a 500 but of course I initially went the cheaper route to have fun dressing it up.

    My first thought is to try out a different size or even another brand but I wanted to get other opinions first.

    Any help would greatly be appreciated.

    Cheers
    Attached Files
Working...
UA-8071174-1