Unconfigured Ad Widget

Collapse

Length of pull

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigbearbear
    Calguns Addict
    • Jun 2011
    • 5378

    Length of pull

    Am I imagining things or does the length of pull have a major impact on how well you shoot clay targets with a shotgun?

    I bought my first shotgun in Oct, a Benelli Supersport. It comes from the factory with the default configuration and a LOP of 14 3/8 inch. I've never noticed it before and simply kept shooting, thinking that because I'm new to shotgun maybe I'm not mounting the gun properly. Recently, I started noticing that because the LOP is so long (and I'm not a tall guy), what I've been doing is trying to pull the shotgun "into" my shoulder with my left hand. This pulling action causes me to tense up, resulting in a not very smooth swinging action. I started to notice this because I watched some Youtube videos and the guy recommended practicing gun mounting at home, thank you internet!

    What I did was to order the reduced LOP recoil pad, which gives me a LOP now of 13 7/8 inch. It isn't a lot of change, but I no longer try to pull the shotgun into my shoulder and my swings are much smoother. I shot much better when I went and tested it out today at Coyote Valley.

    So, does LOP have a major impact on how well you shoot? And is this why competitors always have wooden stocks because it is easier to shape and customize to their exact measurement? If so, I want to try something out; use a 3D printer and print out a synthetic stock for my Benelli Supersport to my exact measurement. Should be pretty cool.
  • #2
    m16
    Veteran Member
    • Aug 2010
    • 2527

    Yes, length of pull is critical and not just for shooting clays.

    This is why you can find aftermarket stocks in varying lengths, and every shop will have at least one guy who is good at shortening stocks.

    Ideally you should take your gun to someone that specializes in this, and have your stock fitted to your body.
    Marine Raider Foundation

    Comment

    • #3
      Thefeeder
      Calguns Addict
      • Jun 2007
      • 5011

      Originally posted by bigbearbear
      Am I imagining things or does the length of pull have a major impact on how well you shoot clay targets with a shotgun?

      I bought my first shotgun in Oct, a Benelli Supersport. It comes from the factory with the default configuration and a LOP of 14 3/8 inch. I've never noticed it before and simply kept shooting, thinking that because I'm new to shotgun maybe I'm not mounting the gun properly. Recently, I started noticing that because the LOP is so long (and I'm not a tall guy), what I've been doing is trying to pull the shotgun "into" my shoulder with my left hand. This pulling action causes me to tense up, resulting in a not very smooth swinging action. I started to notice this because I watched some Youtube videos and the guy recommended practicing gun mounting at home, thank you internet!

      What I did was to order the reduced LOP recoil pad, which gives me a LOP now of 13 7/8 inch. It isn't a lot of change, but I no longer try to pull the shotgun into my shoulder and my swings are much smoother. I shot much better when I went and tested it out today at Coyote Valley.

      So, does LOP have a major impact on how well you shoot? And is this why competitors always have wooden stocks because it is easier to shape and customize to their exact measurement? If so, I want to try something out; use a 3D printer and print out a synthetic stock for my Benelli Supersport to my exact measurement. Should be pretty cool.

      Yes LOP does impact on how well you will shoot. However LOP is just one aspect of a good fitting gun...there is also Drop at Comb and Heel, Cast and Pitch.

      A note to take into consideration....before a good fit for shooter can be found, a shooter must be able to mount the shotgun the same way each time.

      Until the shooter has a consistent mount .....gun fitting is fruitless. Gun fitting gets the gun to shoot POA POI...or what ever POI is wanted. If you mount the gun differently each time your changing the POI, so no adjustment will compensate for an inconsistent gun mount.

      Shooters should practice mounting their guns with their eyes closed....when you can get the same sight picture each and every time you open your dominate eye .....your ready for some stock adjustments if needed.

      Hope this helps you understand a bid more about gun fit
      Last edited by Thefeeder; 11-29-2013, 6:46 PM.

      Comment

      • #4
        bigbearbear
        Calguns Addict
        • Jun 2011
        • 5378

        Originally posted by Thefeeder
        Shooters should practice mounting their guns with their eyes closed....when you can get the same sight picture each and every time you open your dominate eye .....your ready for some stock adjustments if needed.

        Hope this helps you understand a bid more about gun fit
        Yes, it does and thanks. This is the method I saw a video of and use, except that I also wear my ear muffs when I do this. I've discovered that my ear muffs, Howard Leight Impact Pro (the higher NPR version, not Impact Sport) can interfere with my gun mount if I don't do it correctly, like tilting my head. So I wear them when I practice at home.

        I've also found the mid-bead to be a great help, if I close my eyes, mount the gun, then open my dominant eye and see the 2 beads properly aligned, I knew I've done it right.

        Comment

        • #5
          Revoman
          Senior Member
          • Dec 2007
          • 2394

          "I've also found the mid-bead to be a great help, if I close my eyes, mount the gun, then open my dominant eye and see the 2 beads properly aligned, I knew I've done it right. "

          Thefeeder is trying to tell you that you only need to mount it the same way every time, not that the beads necessarily align. You are looking to mount the gun the same every time whether the beads are aligned or not makes no difference as that is part of what a fitted stock will remedy.

          One of the problems in fitting a shotgun is that shooters who get used to adjusting their body to fit the gun are 'fooling' themselves into thinking that the gun fits. While it may, that would be unusual for an off the shelf gun.

          Comment

          • #6
            bigbearbear
            Calguns Addict
            • Jun 2011
            • 5378

            Originally posted by Revoman
            Thefeeder is trying to tell you that you only need to mount it the same way every time, not that the beads necessarily align. You are looking to mount the gun the same every time whether the beads are aligned or not makes no difference as that is part of what a fitted stock will remedy.

            One of the problems in fitting a shotgun is that shooters who get used to adjusting their body to fit the gun are 'fooling' themselves into thinking that the gun fits. While it may, that would be unusual for an off the shelf gun.
            Thanks, I also noticed this but it is sort of like a "best you can do" kind of situation. With a synthetic stock, the Benelli SuperSport is difficult to customize. I asked the Pro Shop at Coyote Valley and their staff gun fitter says that it is either difficult or will be very expensive (eg. http://www.softtouchstocks.com/compositestocks.php).

            So essentially I've done what you said, picking a stance and mounting style and adapt to the shotgun best as I can. The LOP is somewhat fixed now (I'll like it to be just a little bit shorter) and the drop seems ok, cast is a little off but I can compensate for it.

            It probably won't do for competition but for my once-a-week clay shooting day trip, it'll have to do for now. Now if I can find someone with a 3D printer who don't mind helping me print out a stock....

            And talking about this topic, it amazes me why do shotgun manufacturers insist on making shotguns that have so little user adjustable settings? Its like buying a car that does not allow you to adjust the seats, mirrors and steering column much, just a little bit.

            Comment

            • #7
              Thefeeder
              Calguns Addict
              • Jun 2007
              • 5011

              ><

              They have come to grips with the problem over the years. Did your Super sport come with stock shims?

              Comment

              • #8
                bigbearbear
                Calguns Addict
                • Jun 2011
                • 5378

                Originally posted by Thefeeder
                They have come to grips with the problem over the years. Did your Super sport come with stock shims?
                Yes, it came with shims to adjust for left or right hand cast, and also shims for adjusting drop. The comb is also replaceable with mid or high comb.

                I do wish the shims are a little more comprehensive, for example, maybe shims for adjusting different amount of cast off/on would be nice.

                Comment

                • #9
                  squeeze
                  Senior Member
                  • Jul 2011
                  • 1342

                  Do not contort your neck/arm, eye hold and cheek mount in order to fit your body to the gun. The results will be aches, pains and poor shooting. Do runners buy an ill-fitting pair of shoes and try to get their feet to adapt...
                  As the Feeder said. Get to where you are consistently mounting the gun with out trying to sight the beads properly. After you have accomplished a good gun mount; THEN it is time for a stock fitter to take that mount and manipulate the stock to where the beads line up properly while KEEPING the same mount. You can't do this by your self. e.g. looking from the muzzle end to see the pupil of your eye in relation to the barrel, stock and beads.
                  The very first thing that needs to be done is to check for right or left eye dominance. Don't even need a gun for that.

                  Comment

                  • #10
                    hattles
                    Senior Member
                    • Feb 2010
                    • 519

                    Originally posted by bigbearbear
                    Yes, it came with shims to adjust for left or right hand cast, and also shims for adjusting drop. The comb is also replaceable with mid or high comb.

                    I do wish the shims are a little more comprehensive, for example, maybe shims for adjusting different amount of cast off/on would be nice.
                    I would suggest that you talk to the shooting instructor/pro shop @ Coyote Valley and see if they can take a look at your gun mount and offer some professional advice regarding your LOP and shim adjustments with your new Benelli. They are a Benelli dealer and should help you get your SuperSport adjusted to fit you. In my opinion that's the simplest way to handle it rather than have a bunch of us offer our "opinion" further confusing the issue.
                    If I ever stop laughing, I'm dead.
                    The shooting star - Tom Knapp
                    http://www.youtube.com/watch?v=g9jUkOAvP9g

                    Comment

                    • #11
                      xxINKxx
                      Veteran Member
                      • Jun 2008
                      • 4289

                      I'm having issues with the LOP on my 590a1. The factory stock is too damn long. I purchased a hogue 12" lop stock which is too dang short, my nose is touching my thumb and punches me when I shoot. I need something in between.

                      The factory stock on my 930 spx is perfect. As well as the factory stock on my buddy's 870 tactical...

                      Anyone have experience with the choate stock that has the adjustable shims? Not many pics or anything via google search.
                      "If a law is unjust, a man is not only right to disobey it, he is obligated to do so." - Thomas Jefferson

                      Comment

                      • #12
                        mjsweims
                        Senior Member
                        • May 2009
                        • 807

                        If you are willing to spend the money get a PFS stock. It is fully adjustable. You can also have an adjustable comb cut into an existing stock. That in conjunction with an adjustable butt pad will give all the adjustment you want. Also if you only want the LOP to be adjustable look into an adjustable trigger.
                        Jack

                        sigpic

                        Comment

                        • #13
                          mjsweims
                          Senior Member
                          • May 2009
                          • 807

                          Another thing to consider is that your clothes also will affect LOP so your cold weather jacket will have the effect of lengthening LOP relative to a summer t-shirt
                          Jack

                          sigpic

                          Comment

                          • #14
                            midlife
                            Senior Member
                            • Jul 2013
                            • 711

                            Do you really think you need shorter? Ask a shooting coach.
                            ----------------------------
                            K80 Trap Special

                            Comment

                            • #15
                              bigbearbear
                              Calguns Addict
                              • Jun 2011
                              • 5378

                              Originally posted by midlife
                              Do you really think you need shorter? Ask a shooting coach.
                              I may have to do that eventually, but I like figuring things out myself. I guess maybe that's why I'm a software engineer, always tinkering, figuring things out and solving problems.

                              Comment

                              Working...
                              UA-8071174-1