Unconfigured Ad Widget

Collapse

How to convert Rem. Model 11

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andycee@hotmail.com
    Senior Member
    • Jan 2009
    • 507

    How to convert Rem. Model 11

    I have what I believe to be a Remington Model 11-R 12ga semi-auto shotgun. It has an 18-1/2" barrel, a duck scene engraved on both sides of the receiver, "The Sportsman" on the bolt and the serial number is 792826.
    Just had it checked out by a licensed gunsmith and all appears to be well. I would like to remove the magazine plug so as to go to 5rds (4+1) vs. the current 3 (2+1). Is this something that I can do, or is it best done by a gunsmith? Also, any info on this particular model and estimate as to age would be appreciated. Thanks advance.
  • #2
    Grumpyoldretiredcop
    Calguns Addict
    • Sep 2008
    • 6437

    Andy, you should not need a gunsmith to do this job. Here is a YouTube video showing how to disassemble your Model 11. You won't have to go any further than the first minute of the video, where it shows the removal of the magazine cap and barrel. You should not have to go any further than that, although these instructions say to pull the forend off also.

    When removing the magazine cap, be aware that there may or may not be a retainer underneath to retain the magazine spring (there should be, but you never know!), so be careful when you remove the cap.

    Remove the spring steel retainer carefully by prying it up on each side alternately, restraining the magazine spring and retainer as it comes out.

    Remove the plug, stuff the magazine spring back in and reinsert the retainer on top of it (squeezing it together to get it started in the tube), then reinstall the magazine cap. Make sure that the magazine follower stays in the magazine tube, or that you put it back with the hollow end facing the spring if it does come out.

    Try the Remington Society of America for info on your Model 11.
    Last edited by Grumpyoldretiredcop; 04-02-2013, 8:35 PM.
    I'm retired. That's right, retired. I don't want to hear about the cop who stopped you today or how you didn't think you should get a ticket. That just makes me grumpy!

    Comment

    • #3
      Spyder
      CGN Contributor
      • Mar 2008
      • 17386

      Yeeup, quick and easy job, just don't let the spring bonk you in the face if someone in the past removed the retainer! Very cool shotgun as well. Enjoy it!

      Comment

      • #4
        John Browning
        Calguns Addict
        • May 2006
        • 8089

        I believe that the Sportsman might be a permanent modification to the magazine. I don't know how "permanent" the modification is, but the Sportsman was billed as a limited capacity shotgun from Remington. That is why it is not called a Model 11 on the bolt. The Model 11 magazine is not the same as the Sportsman magazine as far as I know.

        Value is probably $250-350.
        For Sale: Off Roster Handgun Moving Sale

        For Sale: Off Roster CZ, Browning, PTR 91 Moving Sale

        Originally posted by KWalkerM
        eh why bring logic into this, that makes too much sense... besides when you have bested a fool, you have accomplished nothing and he is a fool.

        Comment

        Working...
        UA-8071174-1