KSG owners please help.

[mr_benster]

I was looking at my KSG and I noticed that the pin(Hammer Axis) that goes through the hammer is missing a part. Its some sort of retaining washer or lock.

If you look at your manual and look at the exploded view, It's number 262 SHM-13. It goes on the two ends of the hammer axis part number 257.

The Gun works fine but when I took it down, I noticed that it was loose and thats when I looked at the diagram. I don't know if this is just a misprint on the manual.

Can anyone help me out and look to see if you have that part on your KSG?

Thanks,

[AragornElessar86]

[DBoulant]

yeah that's not safe to use anymore, send it to me and I'll dispose of it properly for you. Safety first!

[pTa]

//Our name goes on before the quality goes in.//
Keltec

[mr_benster]

Thanks for the help fellas.

[alfred1222]

I was looking at my KSG and I noticed that the pin(Hammer Axis) that goes through the hammer is missing a part. Its some sort of retaining washer or lock.

If you look at your manual and look at the exploded view, It's number 262 SHM-13. It goes on the two ends of the hammer axis part number 257.

The Gun works fine but when I took it down, I noticed that it was loose and thats when I looked at the diagram. I don't know if this is just a misprint on the manual.

Can anyone help me out and look to see if you have that part on your KSG?

Thanks,

I'll go home and check the two i have and I'll PM you an answer

[Dead*Reckoned]

pics

[-hanko]

//Our name goes on weppuns ship before the quality goes in.//
Keltec

Fixed.

[mr_benster]

I'll go home and check the two i have and I'll PM you an answer

Thank you, appreciate it greatly.