What's wrong with my 930 SPX?!?! *UPDATE*

[RippSpeed]

Ok, I solved the problem! I couldn't help but think about this problem while at work today so when I had the free time I pulled out the SPX and started to inspect it (Nordic clamp was on). After about 5 minutes looking at it carefully I noticed that the magazine tube was just slightly bent downwards. I slowly started to loosen the clamp and I noticed as I loosened it, the magazine tube started to straighten.

After the clamp was off I screwed down the magazine tube as hard as possible. I reinstalled the clamp slowly watching to make sure it didn't bend the tube downward again. I got it pretty tight, but not as tight as it was when it was causing these problems. I did a function check (loading 7 shells in tube) about 10 times making sure it didn't jam and it now works like it did before!! Maybe the factory Choak tube is a POS after all. If I decide to keep this I'm definitely going to get a Nordic +2 extension tube.

If you get the Nordic extended tube get the +2 with the XL end cap ... this will give you 8 in the tube with the nordic spring or factory spring. And will be flush. Add the XXL 1 1/2" will give you +2 ... But will be way past the muzzle.

heres M24Shooter's Spx w/ a XL end cap:

[FLAWLS1]

If you get the Nordic extended tube get the +2 with the XL end cap ... this will give you 8 in the tube with the nordic spring or factory spring. And will be flush. Add the XXL 1 1/2" will give you +2 ... But will be way past the muzzle.

heres M24Shooter's Spx w/ a XL end cap:

Cool, that's good to know! If I keep it I was already planning to get that Nordic tube.