Unconfigured Ad Widget

Collapse

Cleaning the Pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Cato
    Calguns Addict
    • Apr 2006
    • 5659

    Originally posted by holyhandgrenade
    Should I clean my 870 prior to its initial use? Im picking it up on Friday, and would like to shoot it sometime this weekend (if not Friday night ), but Im wondering if they come coated in grease that I should remove first, or if its ready to go out of the box.
    The only gun I have any experience with is a Mosin which was coated with cosmoline, so obviously that needed to go before I shot it (which Ive never gotten around to...) but I was wondering about the 870.

    From the sound of things, pumps are kinda easy care wise. I dont mind putting in the work, but I am an inherently lazy person so...
    __________________________________________________ ____
    You probably don't need to clean it. When I got my 870 it came with some factory lube and I could tell it had been test fired since there was a touch of grime.

    But as a rule of thumb, it's always good to clean and get to know your new gun before you hit the range. It's your responsiblity to check it and see if everything is safe and in working order before you shoot it.

    Comment

    • #17
      ajl2121
      Member
      • Jan 2007
      • 324

      Well with my first shotgun (mossberg 500), I did not clean it before going to the range. Not because I didn't want to, but because I didn't know. Also, I fired 50 shells from it (25 each on two different occasions), and only cleaned the barrel and the reachable parts on the receiver. What would be the recommended action as of now? I am somewhat of a "clean freak" and wouldn't mind spending the time to clean and maintain my weapons; however, I just simply do not know the correct method. The owner's manual tells me what I should do, but does not include much of an explanation on how to go about doing so.

      Comment

      • #18
        Utha Schleigle
        Senior Member
        • Oct 2007
        • 593

        I usually take gun apart to three basics group assemblies ( barrel - reciever - trigger group ).

        Brush and coat bore with Hopps 9 and let set while I Clean other groups. Wipe bolt face or rotor-ey bolt with Hopp 9 or any thing else with powder residue. Pour a little bore cleaner in a shot glass (put cap back on) and dip patches in that. Either I contaminant bottle or knock it over. Put Hopps soaked patch over brush and send it through all the way - then back - never reverse in barrel. If stuck spray oil spin and move.

        Get old T shirts and wipe down all parts and light coat of WD-40 and at heavy wear points TriFlow or Slick 50 Teflon heavy oil (one or two dropps). If you use more than two or three drops of super lube it dribbles out the actions - one or two vropps wicks up parts and no waste or mess. SHAKE VIOLENTLY the bottle or can if Teflon or Dry Slide. For pump arms - hammer pivit pins - bolt parts.

        This is where I would use the tampon as a disposal bore mopp.
        Put patches down barrel untill they come out white and clean - then spray WD-40 down barrel both directions put one more patch to coat bore for storage with WD40 prayed on it.

        For cold weather or hunts go very light on lubes and make sure you have cold weather rated oil that will not gell in cold climates. Clean and inspect mag tube and spring.

        I think and major cleaning after heavy shooting day.

        After 500 to 1000 rounds take 0000 or 00000 steel whool and wrapp around bore brush dribbal Hopps on it brush. Spin at forcing cones where lead & plastic smears happen ( like the stains in your underwear ). These can smears on forcing cones can effect your patterns and vexx trapp shooters.
        Use dry and put white piece of paper at end of barrel to see extra crap and residue shavings. Forcing cones are located inside barrel just after chamber and at choke (if not stovepipe). Another old school applicator for steel wool is a dowel with raised section with knife or xacto blade and wrapp steel wool around that.

        Wipe with WD-40 and try not to touch metal parts as you out back into case.
        Last edited by Utha Schleigle; 01-01-2008, 7:50 PM.
        PLEASE WEAR EYE PROTECT & PROTECTIVE GEAR IN SHOP!!!!!! You can order another part from from manufacturer, but you can't order another finger or eye from your mother & father.

        ***This DOES NOT constitute GOOD or SANE legal - professional gunsmithing - psychiatric MD - tax - accounting -gardening advice. Please contactact qualified a professional in their repective specialties.*** AWHHH go ahead and mix match specialities that could be funny!!!!!

        Comment

        Working...
        UA-8071174-1