Unconfigured Ad Widget

Collapse

Problems with Mossberg safety

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • steelholder
    Veteran Member
    • Jul 2010
    • 3328

    Problems with Mossberg safety

    I haven't shot it in months but i remember having this really annoying issue with the safety. After shooting 4 or 5 shells the safety begins to creep down, just enough to lock the trigger. I tightened the screw but it doesn't seem to help.

    I have tried blocking the switch by putting something directly underneath but it always falls out, id like to have a properly functioning safety but even better a shotgun that wont lock up.

    Anyone else have this problem?
    WTB 3rd Gen SW also looking for a 22 pistol with 6" bbl or longer
  • #2
    mrkam
    Senior Member
    • Jun 2008
    • 636

    I did, but with an aftermarket safety. My solution was to take a dremel, put a metal grinding with a pointed tip, and deepen the indent on the bottom of the safety that the ball bearing clicks into. That way, it'll be much harder to turn on the safety. In order to do that, you have to disassemble the safety, which isn't that hard once you've done it a few dozen times.

    Comment

    • #3
      jakesfords
      Junior Member
      • Jul 2011
      • 18

      i just had this happen were after 4 rounds (the first time i ever shot the gun and i got it brand new)it set off the safty and would not fire anymore when i got it home i pulled out the triger the firing pin came out the back of the bolt and stuck in between the bolt and the frame. i had to send mine back to mossberg

      Comment

      • #4
        jakesfords
        Junior Member
        • Jul 2011
        • 18

        Comment

        • #5
          strakill
          Senior Member
          • Jun 2011
          • 1484

          I own 3 mossy's and the only problem with the safety is there a lil tough to use till they break in. I haven't heard of a creeping safety so I would like to know what the problem is and how it got solved.
          Originally posted by superhondaz50
          I should note, I have a hookup..., just trying to determine the cost to put it in.
          Originally posted by beerman
          ...He comes out while I'm at work to **** the wife..I shall name him Sancho.

          Comment

          • #6
            ojisan
            Agent 86
            CGN Contributor
            • Apr 2008
            • 11787

            On many Mossbergs, the safety button is plastic.
            It is held in place by a tapered head screw.
            If the screw is overtightened, the plastic button can crack, then tension on the safety parts will be lost.
            Replace the safety button with this metal one:

            Originally posted by Citadelgrad87
            I don't really care, I just like to argue.

            Comment

            • #7
              Dutch3
              I need a LIFE!!
              • Oct 2010
              • 14181

              Mine (plastic knob) broke many years ago and I only recently replaced it. Before fixing it, I had to consciously hold the safety forward in order to fire. Not really a bad deal...a safety that fails safe.
              Just taking up space in (what is no longer) the second-worst small town in California.

              Comment

              • #8
                swifty
                Senior Member
                • Mar 2008
                • 929

                Originally posted by steelholder
                After shooting 4 or 5 shells the safety begins to creep down...
                The breech bolt is probably making contact with the safety itself. The safety will need to be removed and the large inside radius will need to be deepened and/or a larger radius cut.

                Comment

                • #9
                  RJ13
                  Junior Member
                  • Oct 2010
                  • 81

                  Same thing happened to me. Remove and inspect firing pin and the pin that retains it in bolt. Send trigger group to Mossberg for replacement if pins are worn or battered. Train like you fight, use dummy rounds for dry fire.

                  Comment

                  • #10
                    Sicarius
                    CGN/CGSSA Contributor
                    CGN Contributor
                    • Jan 2008
                    • 2917

                    My 590 would engage the safety when racking the slide fairly soon after I bought it. An aftermarket metal safety fixed the issue.
                    Kevin

                    Comment

                    • #11
                      kingjoey
                      Banned
                      • Jun 2008
                      • 441

                      On every Mossberg that comes through here we take that little steel plate out and lightly countersink the holes with a 3/16" drill bit. Makes the safety smoother and keeps it from creeping.

                      Comment

                      • #12
                        steelholder
                        Veteran Member
                        • Jul 2010
                        • 3328

                        Thanks everyone.
                        WTB 3rd Gen SW also looking for a 22 pistol with 6" bbl or longer

                        Comment

                        • #13
                          all torque
                          Member
                          • Jul 2008
                          • 407

                          I have 2 500's, one is 8 yrs old and the other is about a month old. I haven't had any issues with the safety...knock on wood. Hope it gets resolved for you.

                          Comment

                          • #14
                            dr_communist
                            Member
                            • Jan 2010
                            • 415

                            I bought my 500 used and the 2ndrecoil range trip I got that safety creep. So I just ground the safety mechanism out of the receiver. No more safety but it doesn't bother me I just keep my finger off the trigger.

                            Comment

                            • #15
                              steelholder
                              Veteran Member
                              • Jul 2010
                              • 3328

                              i also may consider this, once you pump it you should also be ready to pull trigger right??
                              WTB 3rd Gen SW also looking for a 22 pistol with 6" bbl or longer

                              Comment

                              Working...
                              UA-8071174-1